Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsInterface ICsInterface IC - analogue switches SC 70 6

Table Of Contents

www.ti.com

FEATURES APPLICATIONS

DESCRIPTION

V+

GND NC

COM

TS5A4624

1- Ω SPDT ANALOG SWITCH

5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER

SLYS014A – DECEMBER 2005 – REVISED AUGUST 2006

• Cell Phones

• Isolation in Power-Down Mode, V

= 0

• PDAs

• Specified Break-Before-Make Switching

• Portable Instrumentation

• Low ON-State Resistance (1 Ω )

• Audio and Video Signal Routing

• Control Inputs Are 5.5-V Tolerant

• Low-Voltage Data-Acquisition Systems

• Low Charge Injection

• Communication Circuits

• Excellent ON-State Resistance Matching

• Modems

• Low Total Harmonic Distortion (THD)

• Hard Drives

• 1.65-V to 5.5-V Single-Supply Operation

• Computer Peripherals

• Latch-Up Performance Exceeds 100 mA

• Wireless Terminals and Peripherals

Per JESD 78, Class II

• ESD Performance Tested Per JESD

– 2000-V Human-Body Model

(A114-B, Class II)

– 1000-V Charged-Device Model (C101)

The TS5A4624 is a single-pole double-throw (SPDT) analog switch that is designed to operate from 1.65 V to

5.5 V. The device offers low ON-state resistance and excellent ON-state resistance matching with the

break-before-make feature, to prevent signal distortion during the transferring of a signal from one channel to

another. The device has an excellent total harmonic distortion (THD) performance and consumes very low

power. These features make this device suitable for portable audio applications.

SC-70

(TOP VIEW)

Switches are shown for logic 0 input.

FUNCTION TABLE

NC TO COM, NO TO COM,

COM TO NC COM TO NO

L ON OFF

H OFF ON

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas

Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (28 pages)

PAGE 1
TS5A4624 1-Ω SPDT ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SLYS014A – DECEMBER 2005 – REVISED AUGUST 2006 FEATURES APPLICATIONS • • • • • • • • • • • • • • • • • • • • Isolation in Power-Down Mode, V+ = 0 Specified Break-Before-Make Switching Low ON-State Resistance (1 Ω) Control Inputs Are 5.5-V Tolerant Low Charge Injection Excellent ON-State Resistance Matching Low Total Harmonic Distortion (THD) 1.65-V to 5.
PAGE 2
TS5A4624 1-Ω SPDT ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SLYS014A – DECEMBER 2005 – REVISED AUGUST 2006 SUMMARY OF CHARACTERISTICS (1) 2:1 Multiplexer/ Demultiplexer (1 × SPDT) Configuration Number of channels 1 1.1 Ω ON-state resistance ron) ON-state resistance match (∆ron) 0.1 Ω ON-state resistance flatness ron(flat)) 0.
PAGE 3
TS5A4624 1-Ω SPDT ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SLYS014A – DECEMBER 2005 – REVISED AUGUST 2006 Absolute Minimum and Maximum Ratings (1) (2) over operating free-air temperature range (unless otherwise noted) MIN MAX V+ Supply voltage range (3) –0.5 6.5 V VNO VNC VCOM Analog voltage range (3) (4) (5) –0.5 V+ + 0.
PAGE 4
TS5A4624 1-Ω SPDT ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SLYS014A – DECEMBER 2005 – REVISED AUGUST 2006 Electrical Characteristics for 5-V Supply (1) V+ = 4.5 V to 5.
PAGE 5
TS5A4624 1-Ω SPDT ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SLYS014A – DECEMBER 2005 – REVISED AUGUST 2006 Electrical Characteristics for 5-V Supply (1) (Continued) V+ = 4.5 V to 5.5 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN 25°C 5V 4 Full 4.5 V to 5.5 V 2 25°C 5V 1 Full 4.5 V to 5.5 V 1 25°C 5V 1 Full 4.5 V to 5.
PAGE 6
TS5A4624 1-Ω SPDT ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SLYS014A – DECEMBER 2005 – REVISED AUGUST 2006 Electrical Characteristics for 3.3-V Supply (1) V+ = 3 V to 3.
PAGE 7
TS5A4624 1-Ω SPDT ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SLYS014A – DECEMBER 2005 – REVISED AUGUST 2006 Electrical Characteristics for 3.3-V Supply (1) (Continued) V+ = 3 V to 3.6 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN 25°C 3.3 V 4 Full 3 V to 3.6 V 2 25°C 3.3 V 1 Full 3 V to 3.6 V 1 25°C 3.3 V 2 Full 3 V to 3.
PAGE 8
TS5A4624 1-Ω SPDT ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SLYS014A – DECEMBER 2005 – REVISED AUGUST 2006 Electrical Characteristics for 2.5-V Supply (1) V+ = 2.3 V to 2.
PAGE 9
TS5A4624 1-Ω SPDT ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SLYS014A – DECEMBER 2005 – REVISED AUGUST 2006 Electrical Characteristics for 2.5-V Supply (1) (Continued) V+ = 2.3 V to 2.7, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN 25°C 2.5 V 10 Full 2.3 V to 2.7 V 8 25°C 2.5 V 3 Full 2.3 V to 2.7 V 2 25°C 2.5 V 5 Full 2.3 V to 2.
PAGE 10
TS5A4624 1-Ω SPDT ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SLYS014A – DECEMBER 2005 – REVISED AUGUST 2006 Electrical Characteristics for 1.8-V Supply (1) V+ = 1.65 V to 1.
PAGE 11
TS5A4624 1-Ω SPDT ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SLYS014A – DECEMBER 2005 – REVISED AUGUST 2006 Electrical Characteristics for 1.8-V Supply (1) (Continued) V+ = 1.65 V to 1.95 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN 25°C 1.8 V 17 Full 1.65 V to 1.95 V 15 25°C 1.8 V 3 Full 1.65 V to 1.95 V 2 25°C 1.8 V 15 Full 1.65 V to 1.
PAGE 12
TS5A4624 1-Ω SPDT ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SLYS014A – DECEMBER 2005 – REVISED AUGUST 2006 TYPICAL PERFORMANCE 3.5 1.4 3.0 1.2 V+ = 1.8 V 1 2.0 ron – ron (Ω) 2.5 855C V+ = 2.5 V 1.5 V+ = 3.3 V 1.0 255C 0.8 –405C 0.6 0.4 0.5 V+ = 5 V 0.2 0.0 0 0.5 1 1.5 0 2 0 0.5 1 1.5 VCOM (V) 1 COM (ON) Leakage Current (nA) 0.7 ron (W) 3.5 20 85°C 0.8 25°C 0.6 0.5 –40°C 0.4 0.3 0.
PAGE 13
TS5A4624 1-Ω SPDT ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SLYS014A – DECEMBER 2005 – REVISED AUGUST 2006 TYPICAL PERFORMANCE (continued) 14 45 40 tON 12 tON 10 30 tON/tOFF (ns) tON/tOFF (ns) 35 25 20 15 10 tOFF 8 6 tOFF 4 2 5 0 0 0 1 2 3 4 5 −40 6 25 V+ (V) Figure 7. tON and tOFF vs Supply Voltage Figure 8. tON and tOFF vs Temperature 0 −2 2.0 VIN Rising −4 Gain (dB) Logic Level Threshold (nA) 2.5 1.5 VIN Falling 1.0 −6 −8 −10 0.
PAGE 14
TS5A4624 1-Ω SPDT ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER SLYS014A – DECEMBER 2005 – REVISED AUGUST 2006 TYPICAL PERFORMANCE (continued) 250 ICC+ (nA) 200 150 100 50 0 −60 −40 −20 0 20 40 60 80 100 TA (5C) Figure 13. Current vs Temperature (V+ = 5 V) 14 Submit Documentation Feedback www.ti.
PAGE 15
TS5A4624 1-Ω SPDT ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SLYS014A – DECEMBER 2005 – REVISED AUGUST 2006 PIN DESCRIPTION PIN NO.
PAGE 16
TS5A4624 1-Ω SPDT ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.
PAGE 17
TS5A4624 1-Ω SPDT ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SLYS014A – DECEMBER 2005 – REVISED AUGUST 2006 PARAMETER MEASUREMENT INFORMATION V+ VNC NC COM + VCOM Channel ON VNO NO r on + IN VI ICOM VCOM * VNO or VNC W I COM VI = VIH or VIL + GND Figure 14. ON-State Resistance (ron) V+ VNC NC COM + VCOM + VNO NO IN VI OFF-State Leakage Current Channel OFF VI = VIH or VIL + GND Figure 15.
PAGE 18
TS5A4624 1-Ω SPDT ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SLYS014A – DECEMBER 2005 – REVISED AUGUST 2006 V+ Capacitance Meter VNC NC VNO NO VBIAS = V+ or GND VI = V+ or GND VCOM COM VBIAS VI Capacitance is measured at NC, NO, COM, and IN inputs during ON and OFF conditions. IN GND Figure 17.
PAGE 19
TS5A4624 1-Ω SPDT ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SLYS014A – DECEMBER 2005 – REVISED AUGUST 2006 V+ Logic Input (VI) VNC or VNO NC or NO VCOM V+ 50% 0 COM NC or NO CL(2) VI Switch Output (VCOM) RL IN 90% 90% tBBM Logic Input(1) VNC or VNO = V+ RL = 50 Ω CL = 35 pF GND (1) All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns, tf < 5 ns. (2) CL includes probe and jig capacitance.
PAGE 20
TS5A4624 1-Ω SPDT ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SLYS014A – DECEMBER 2005 – REVISED AUGUST 2006 V+ Network Analyzer Channel ON: NC to COM 50 W VNC Channel OFF: NO to COM NC VCOM Source Signal VNO NO VI 50 W VI = V+ or GND Network Analyzer Setup 50 W IN + Source Power = 0 dBm (632-mV P-P at 50-W load) GND DC Bias = 350 mV Figure 22.
PAGE 21
TS5A4624 1-Ω SPDT ANALOG SWITCH 5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER www.ti.com SLYS014A – DECEMBER 2005 – REVISED AUGUST 2006 Channel ON: COM to NC VSOURCE = V+ P-P VI = VIH or VIL RL = 600 Ω fSOURCE = 20 Hz to 20 kHz CL = 50 pF V+/2 V+ Audio Analyzer RL Source Signal 10 mF NO 10 mF COM 600 W NC 600 W VI CL(1) IN GND 600 W (1) CL includes probe and jig capacitance. Figure 24.
PAGE 22
PACKAGE OPTION ADDENDUM www.ti.
PAGE 23
PACKAGE OPTION ADDENDUM www.ti.com 26-Mar-2013 Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties.
PAGE 24
PACKAGE MATERIALS INFORMATION www.ti.com 25-Aug-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 2.25 2.4 1.22 4.0 8.0 Q3 TS5A4624DCKR SC70 DCK 6 3000 180.0 8.4 TS5A4624DCKR SC70 DCK 6 3000 178.0 9.0 2.4 2.5 1.2 4.0 8.0 Q3 TS5A4624DCKT SC70 DCK 6 250 180.0 8.4 2.25 2.4 1.22 4.0 8.
PAGE 25
PACKAGE MATERIALS INFORMATION www.ti.com 25-Aug-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TS5A4624DCKR SC70 DCK 6 3000 202.0 201.0 28.0 TS5A4624DCKR SC70 DCK 6 3000 180.0 180.0 18.0 TS5A4624DCKT SC70 DCK 6 250 202.0 201.0 28.
PAGE 26
PAGE 27
PAGE 28
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.