Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsInterface ICsInterface IC - analogue switches SC 70 6

FEATURES APPLICATIONS

DESCRIPTION

COM

GND

TS5A9411

www.ti.com

............................................................................................................................................................... SCDS241A – MAY 2008 – REVISED JULY 2008

10- Ω SPDT ANALOG SWITCH

SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER

• Cell Phones

• 2.25-V to 5.5-V Single-Supply Operation

• Communication Systems

• Low ON-State Resistance

• Portable Test Equipment

(10 Ω Max at V

= 5V)

• Battery Operated Systems

• Specified Break-Before-Make Switching

• Sample-and-Hold Circuits

• Low Power Consumption

• TTL/CMOS Compatible Control Input

• Low Input/Output Capacitance

The TS5A9411 is a single-pole double-throw (SPDT)

• Latch-Up Performance Exceeds 100 mA

analog switch that is designed to operate from 2.25 V

Per JESD 78, Class II

to 5.5 V. The device offers low ON-state resistance,

• ESD Performance Tested Per JESD

low leakage, and low power with a

break-before-make feature. These features make this

– 2000-V Human-Body Model

device suitable for portable and battery-powered

(A114-B, Class II)

applications.

– 1000-V Charged-Device Model (C101)

• Control Inputs Are 5.5-V Tolerant

FUNCTION TABLE

• Excellent ON-State Resistance Matching

NC TO COM, NO TO COM,

COM TO NC COM TO NO

• Low Total Harmonic Distortion (THD)

L ON OFF

DCK PACKAGE

H OFF ON

(TOP VIEW)

ORDERING INFORMATION

PACKAGE

(1) (2)

ORDERABLE PART NUMBER TOP-SIDE MARKING

(3)

– 40 ° C to 85 ° C SOT (SC-70) – DCK Tape and reel TS5A9411DCKR 32_

(1) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging .

(2) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI

website at www.ti.com .

(3) DCK: The actual top-side marking has one additional character that designates the assembly/test site.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas

Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (23 pages)

PAGE 1
TS5A9411 www.ti.com ............................................................................................................................................................... SCDS241A – MAY 2008 – REVISED JULY 2008 10-Ω SPDT ANALOG SWITCH SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER FEATURES APPLICATIONS • • • • • • • 1 • • • • • • • • • 2.25-V to 5.
PAGE 2
TS5A9411 SCDS241A – MAY 2008 – REVISED JULY 2008 ............................................................................................................................................................... www.ti.com SUMMARY OF CHARACTERISTICS (1) 2:1 Multiplexer/ Demultiplexer (1 × SPDT) Configuration Number of channels 1 ON-state resistance (rON) 5.3 Ω ON-state resistance match (ΔrON) 0.
PAGE 3
TS5A9411 www.ti.com ............................................................................................................................................................... SCDS241A – MAY 2008 – REVISED JULY 2008 ELECTRICAL CHARACTERISTICS FOR 5-V SUPPLY (1) V+ = 4.5 V to 5.
PAGE 4
TS5A9411 SCDS241A – MAY 2008 – REVISED JULY 2008 ............................................................................................................................................................... www.ti.com ELECTRICAL CHARACTERISTICS FOR 5-V SUPPLY (continued) V+ = 4.5 V to 5.5 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Dynamic Turn-on time tON VCOM = 3 V, RL = 300 Ω, CL = 35 pF, See Figure 10 25°C 5V 9 Full 4.5 V to 5.
PAGE 5
TS5A9411 www.ti.com ............................................................................................................................................................... SCDS241A – MAY 2008 – REVISED JULY 2008 ELECTRICAL CHARACTERISTICS FOR 3-V SUPPLY (1) V+ = 2.7 V to 3.3 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Analog Switch Analog signal range ON-state resistance VCOM, VNO, VNC 0 rON VNO or VNC = 1.
PAGE 6
TS5A9411 SCDS241A – MAY 2008 – REVISED JULY 2008 ............................................................................................................................................................... www.ti.com ELECTRICAL CHARACTERISTICS FOR 3-V SUPPLY (continued) V+ = 2.7 V to 3.3 V, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT Dynamic Turn-on time tON VCOM = 3 V, RL = 300 Ω, CL = 35 pF, See Figure 10 25°C 3V 13 Full 2.
PAGE 7
TS5A9411 www.ti.com ............................................................................................................................................................... SCDS241A – MAY 2008 – REVISED JULY 2008 ELECTRICAL CHARACTERISTICS FOR 2.5-V SUPPLY (1) V+ = 2.25 V to 2.
PAGE 8
TS5A9411 SCDS241A – MAY 2008 – REVISED JULY 2008 ............................................................................................................................................................... www.ti.com ELECTRICAL CHARACTERISTICS FOR 2.5-V SUPPLY (continued) V+ = 2.25 V to 2.75, TA = –40°C to 85°C (unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS TA V+ MIN TYP MAX UNIT 25°C 2.5 V 18 Full 2.25 V to 2.75 V 20 25°C 2.5 V 8 Full 2.25 V to 2.
PAGE 9
TS5A9411 www.ti.com ............................................................................................................................................................... SCDS241A – MAY 2008 – REVISED JULY 2008 TYPICAL PERFORMANCE 14 15 12 10 V = 2.5 V + 10 5 8 V+ = 3.3 V 6 0 4 -5 V =5V + 2 -10 0 0 1 2 3 4 5 6 -15 0 5 20 20 0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 100.00E+3 15 Figure 2. Charge Injection (QC) vs VCOM 0 INS -20 Gain (dB) Gain (dB) Figure 1.
PAGE 10
TS5A9411 SCDS241A – MAY 2008 – REVISED JULY 2008 ............................................................................................................................................................... www.ti.com PIN DESCRIPTION PIN NO.
PAGE 11
TS5A9411 www.ti.com ...............................................................................................................................................................
PAGE 12
TS5A9411 SCDS241A – MAY 2008 – REVISED JULY 2008 ............................................................................................................................................................... www.ti.com PARAMETER MEASUREMENT INFORMATION (continued) V+ VNC NC COM + VCOM VNO NO ON-State Leakage Current Channel ON VI = VIH or VIL IN VI + GND Figure 8.
PAGE 13
TS5A9411 www.ti.com ............................................................................................................................................................... SCDS241A – MAY 2008 – REVISED JULY 2008 V+ VCOM NC or NO VNC or VNO NC or NO CL(2) TEST RL CL VCOM tON 50 Ω 35 pF V+ tOFF 50 Ω 35 pF V+ COM RL IN VI Logic Input(1) CL(2) GND RL V+ Logic Input (VI) 50% 50% 0 tON Switch Output (VNC or VNO) tOFF 90% 90% A.
PAGE 14
TS5A9411 SCDS241A – MAY 2008 – REVISED JULY 2008 ............................................................................................................................................................... www.ti.com V+ NC or NO V+ Logic Input (VI) VNC or VNO VCOM 50% 0 COM NC or NO CL(2) VI Switch Output (VCOM) RL IN 90% 90% tBBM Logic Input(1) VNC or VNO = V+ RL = 50 Ω CL = 35 pF GND A.
PAGE 15
TS5A9411 www.ti.com ............................................................................................................................................................... SCDS241A – MAY 2008 – REVISED JULY 2008 V+ Network Analyzer Channel OFF: NC to COM 50 W VNC NC VI = V+ or GND COM Source Signal 50 W VCOM NO Network Analyzer Setup IN Source Power = 0 dBm (632-mV P-P at 50-W load) VI 50 W + GND DC Bias = 350 mV Figure 13.
PAGE 16
TS5A9411 SCDS241A – MAY 2008 – REVISED JULY 2008 ............................................................................................................................................................... www.ti.com V+ RGEN VGEN Logic Input (VI) ON OFF OFF V IL NC or NO COM + VIH VCOM ∆VCOM VCOM NC or NO CL(2) VI VGEN = 0 to V+ IN Logic Input(1) RGEN = 0 CL = 1 nF QC = CL × ∆VCOM VI = VIH or VIL GND A.
PAGE 17
PACKAGE OPTION ADDENDUM www.ti.
PAGE 18
PACKAGE OPTION ADDENDUM www.ti.com 20-May-2013 continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
PAGE 19
PACKAGE MATERIALS INFORMATION www.ti.com 13-Apr-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant TS5A9411DCKR SC70 DCK 6 3000 180.0 8.4 2.25 2.4 1.22 4.0 8.0 Q3 TS5A9411DCKT SC70 DCK 6 250 180.0 8.4 2.25 2.4 1.22 4.0 8.
PAGE 20
PACKAGE MATERIALS INFORMATION www.ti.com 13-Apr-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TS5A9411DCKR SC70 DCK 6 3000 202.0 201.0 28.0 TS5A9411DCKT SC70 DCK 6 250 202.0 201.0 28.
PAGE 21
PAGE 22
PAGE 23
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.