Host Controller Data Manual

3–7
3.8 Header Type and BIST Register
The header type and BIST register indicates the TSB12LV26 PCI header type, and indicates no built-in self test. See
Table 3–7 for a complete description of the register contents.
Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name Header type and BIST
Type R R R R R R R R R R R R R R R R
Default 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Register: Header type and BIST
Type: Read-only
Offset: 0Eh
Default: 0000h
Table 3–7. Header Type and BIST Register Description
BIT FIELD NAME TYPE DESCRIPTION
15–8 BIST R
Built-in self test. The TSB12LV26 does not include a built-in self test; thus, this field returns 00h when
read.
7–0 HEADER_TYPE R
PCI header type. The TSB12LV26 includes the standard PCI header, and this is communicated by
returning 00h when this field is read.
3.9 OHCI Base Address Register
The OHCI base address register is programmed with a base address referencing the memory-mapped OHCI control.
When BIOS writes all 1s to this register, the value read back is FFFF F800h, indicating that at least 2K bytes of
memory address space are required for the OHCI registers. See Table 3–8 for a complete description of the register
contents.
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
Name OHCI base address
Type R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
Default 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Name OHCI address
Type R/W R/W R/W R/W R/W R R R R R R R R R R R
Default 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Register: OHCI base address
Type: Read/Write, Read-only
Offset: 10h
Default: 0000 0000h
Table 3–8. OHCI Base Address Register Description
BIT FIELD NAME TYPE DESCRIPTION
31–11 OHCIREG_PTR R/W OHCI register pointer. Specifies the upper 21 bits of the 32-bit OHCI base address register.
10–4 OHCI_SZ R
OHCI register size. This field returns 0s when read, indicating that the OHCI registers require a
2-Kbyte region of memory.
3 OHCI_PF R
OHCI register prefetch. This bit returns 0 when read, indicating that the OHCI registers are
nonprefetchable.
2–1 OHCI_MEMTYPE R
OHCI memory type. This field returns 0s when read, indicating that the OHCI base address register is
32 bits wide and mapping can be done anywhere in the 32-bit memory space.
0 OHCI_MEM R
OHCI memory indicator. This bit returns 0 when read, indicating that the OHCI registers are mapped
into system memory space.