Datasheet

TVP5147M1

www.ti.com

SLES140G –JULY 2005–REVISED FEBRUARY 2012

Table 2-32. AVID Start Pixel Register

Subaddress 16h–17h

Default 55h

Subaddress 7 6 5 4 3 2 1 0

16h AVID start [7:0]

17h Reserved AVID active Reserved AVID start [9:8]

AVID active:

0 = AVID out active in VBLK (default)

1 = AVID out inactive in VBLK

AVID start [9:0]:

AVID start pixel number, this is an absolute pixel location from HSYNC start pixel 0.

NTSC 601 default: is 85 (55h)

PAL 601 default: is 95 (5Fh)

The TVP5147M1 decoder updates the AVID start only when the AVID start MSB byte is written to. If the user changes these registers,

then the TVP5147M1 decoder retains values in different modes until this device resets. The AVID start pixel register also controls the

position of the SAV code.

Table 2-33. AVID Stop Pixel Register

Subaddress 18h–19h

Default 325h

Subaddress 7 6 5 4 3 2 1 0

18h AVID stop [7:0]

19h Reserved AVID stop [9:8]

AVID stop [9:0]:

AVID stop pixel number. The number of pixels of active video must be an even number. This is an absolute pixel location from HSYNC

start pixel 0.

For NTSC 601, default is 805 (325h)

For PAL 601, default is 815 (32Fh)

The TVP5147M1 decoder updates the AVID stop only when the AVID stop MSB byte is written to. If the user changes these registers, then

the TVP5147M1 decoder retains values in different modes until this device resets. The AVID start pixel register also controls the position of

the EAV code.

Table 2-34. HSYNC Start Pixel Register

Subaddress 1Ah–1Bh

Default 000h

Subaddress 7 6 5 4 3 2 1 0

1Ah HSYNC start [7:0]

1Bh Reserved HSYNC start [9:8]

HSYNC start pixel [9:0]:

This is an absolute pixel location from HSYNC start pixel 0.

The TVP5147M1 decoder updates the HSYNC start only when the HSYNC start MSB is written to. If the user changes these registers,

then the TVP5147M1 decoder retains values in different modes until this device resets.

Submit Documentation Feedback

Product Folder Link(s): TVP5147M1