Datasheet
TVP5147M1
www.ti.com
SLES140G –JULY 2005–REVISED FEBRUARY 2012
3 Electrical Specifications
3.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)
(1)
MIN MAX UNIT
IOVDD to
0.5 4 V
IOGND
DVDD to
–0.2 2 V
DGND
Supply voltage range
A33VDD
(2)
to
–0.3 3.6 V
A33GND
(3)
A18VDD
(4)
to
–0.2 2 V
A18GND
(5)
V
I
to DGND Digital input voltage range –0.5 4.5 V
V
O
to DGND Digital output voltage range –0.5 4.5 V
A
IN
to AGND Analog input voltage range –0.2 2.0 V
Commercial 0 70
T
A
Operating free-air temperature °C
Industrial −40 85
T
stg
Storage temperature –65 150 °C
JEDEC
(7)
All pins >1000
Human-body model
All pins >1500
(HBM)
AEC-Q100
(8)
Excluding NC pins >3000
V
ESD
ESD stress voltage
(6)
V
JEDEC
(9)
All pins >250
Charged-device model
All pins >250
(CDM)
AEC-Q100
(10)
Excluding NC pins >750
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only and functional operation of the device at these or any other conditions beyond those indicated under Recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) CH1_A33VDD, CH2_A33VDD
(3) CH1_A33GND, CH2_A33GND
(4) CH1_A18VDD, CH2_A18VDD, A18VDD, A18VDD_REF, PLL_A18VDD
(5) CH1_A18GND, CH2_A18GND, A18GND
(6) Electrostatic discharge (ESD) to measure device sensitivity/immunity to damage caused by electrostatic discharges into the device.
(7) Level listed is the passing level per ANSI/ESDA/JEDEC JS-001-2010. JEDEC document JEP155 states that 500-V HBM allows safe
manufacturing with a standard ESD control process, and manufacturing with less than 500-V HBM is possible if necessary precautions
are taken. Pins listed as 1000 V may actually have higher performance.
(8) Tested per AEC Q100-002 rev D
(9) Level listed is the passing level per EIA-JEDEC JESD22-C101E. JEDEC document JEP157 states that 250-V CDM allows safe
manufacturing with a standard ESD control process. Pins listed as 250 V may actually have higher performance.
(10) Tested per AEC Q100-011 rev B
Copyright © 2005–2012, Texas Instruments Incorporated Electrical Specifications 93
Submit Documentation Feedback
Product Folder Link(s): TVP5147M1