Datasheet

TVP5160
www.ti.com SLES135E–FEBRUARY 2005–REVISED APRIL 2011
Table 3-40. Component Autoswitch Mask
Subaddress 30h
Default 00h
7 6 5 4 3 2 1 0
Reserved 576i 480i 576p 480p
Masks the component progressive/interlaced modes from being processed in the autoswitch routines.
480p
0 = Autoswitch does not include 480p progressive modes (default)
1 = Autoswitch includes 480p progressive mode
576p
0 = Autoswitch does not include 576p progressive mode (default)
1 = Autoswitch includes 576p progressive mode
480i
0 = Autoswitch does not include 480i interlaced modes (default)
1 = Autoswitch includes 480i interlaced mode
576i
0 = Autoswitch does not include 576i interlaced mode (default)
1 = Autoswitch includes 576i interlaced mode
Table 3-41. Sync Control
Subaddress 32h
Default 00h
7 6 5 4 3 2 1 0
Reserved Polarity FID Polarity VS Polarity HS VS/VBLK HS/CS
Polarity FID: determines polarity of FID pin
0 = First field high, second field low (default)
1 = First field low, second field high
Polarity VS: determines polarity of VS pin
0 = Active low (default)
1 = Active high
Polarity HS: determines polarity of HS pin
0 = Active low (default)
1 = Active high
VS/VBLK:
0 = VS pin outputs vertical sync (default)
1 = VS pin outputs vertical blank
HS/CS:
0 = HS pin outputs horizontal sync (default)
1 = HS pin outputs composite sync
Copyright © 2005–2011, Texas Instruments Incorporated Internal Control Registers 57
Submit Documentation Feedback
focus.ti.com: TVP5160