Datasheet

TVP5160
www.ti.com SLES135E–FEBRUARY 2005–REVISED APRIL 2011
Table 3-52. Video Standard Status
Subaddress 3Fh
Read only
7 6 5 4 3 2 1 0
Autoswitch Reserved Video standard [3:0]
Autoswitch mode
0 = Single standard set
1 = Autoswitch mode enabled
Video standard [3:0]:
CVBS and S-Video Component Video
0000 = Reserved Reserved
0001 = (M, J) NTSC Interlaced 525 (480i)
0010 = (B, D, G, H, I, N) PAL Interlaced 625 (576i)
0011 = (M) PAL Reserved
0100 = (Combination-N) PAL Reserved
0101 = NTSC 4.43 Reserved
0110 = SECAM Reserved
0111 = PAL 60 Reserved
1000 = Reserved Reserved
1001 = Reserved Progressive 525 (480p)
1010 = Reserved Progressive 625 (576p)
This register contains information about the detected video standard that the device is currently operating. When in autoswitch mode, this
register can be tested to determine which video standard as has been detected.
Table 3-53. GPIO Input 1
Subaddress 40h
Read only
7 6 5 4 3 2 1 0
C_7 C_6 C_5 C_4 C_3 C_2 C_1 C_0
C_x input status:
0 = Input is a low
1 = Input is a high
These status bits are only valid when pins are used as input and are updated at every line.
Copyright © 2005–2011, Texas Instruments Incorporated Internal Control Registers 63
Submit Documentation Feedback
focus.ti.com: TVP5160