Datasheet

TVP5160

www.ti.com

SLES135E–FEBRUARY 2005–REVISED APRIL 2011

Table 3-111. VDP TTX Filter Control

Subaddress BBh

Default 00h

7 6 5 4 3 2 1 0

Reserved Filter logic [1:0] Mode TTX filter 2 TTX filter 1

enable enable

Filter logic [1:0]: Allow different logic to be applied when combining the decision of Filter 1 and Filter 2 as follows:

00 = NOR (default)

01 = NAND

10 = OR

11 = AND

Mode: Indicates which teletext mode is in use:

0 = Teletext filter applies to 2 header bytes (default)

1 = Teletext filter applies to 5 header bytes

TTX filter 2 enable: provides for enabling the teletext filter function within the VDP.

0 = Disable (default)

1 = Enable

TTX filter 1 enable: provides for enabling the teletext filter function within the VDP.

0 = Disable (default)

1 = Enable

If the filter matches or if the filter mask is all 0s, then a true result is returned.

Submit Documentation Feedback

focus.ti.com: TVP5160