Datasheet
TVP5160
www.ti.com
SLES135E–FEBRUARY 2005–REVISED APRIL 2011
6 Electrical Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)
(1)
MIN MAX UNIT
IOVDD to
0.5 4.0 V
IOGND
DVDD to DGND –0.2 2.0 V
Supply voltage range
A33VDD
(2)
to
–0.3 3.6 V
A33GND
(3)
A18VDD
(4)
to
–0.2 2.0 V
A18GND
(5)
V
I
to DGND Digital input voltage range –0.5 4.5 V
V
O
to DGND Digital output voltage range –0.5 4.5 V
A
IN
to AGND Analog input voltage range –0.2 2.0 V
T
A
Operating free-air temperature 0 70 °C
T
stg
Storage temperature –65 150 °C
(1) Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings
only and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) CH1_A33VDD, CH2_A33VDD
(3) CH1_A33GND, CH2_A33GND
(4) CH1_A18VDD, CH2_A18VDD, A18VDD, A18VDD_REF, PLL_A18VDD
(5) CH1_A18GND, CH2_A18GND, A18GND
6.2 Recommended Operating Conditions
PARAMETER TEST CONDITIONS MIN NOM MAX UNIT
IOVDD Supply voltage, digital 3.0 3.3 3.6 V
DVDD Supply voltage, digital 1.65 1.8 1.95 V
AV
DD33
Supply voltage, analog 3.0 3.3 3.6 V
AV
DD18
Supply voltage, analog 1.65 1.8 1.95 V
V
I(PP)
Input voltage, analog (ac-coupling necessary) 0.5 1.0 2.0 V
V
IH
Input voltage high, digital
(1)
0.7 IOVDD V
0.3
V
IL
Input voltage low, digital
(2)
V
IOVDD
I
OH
Output current (Y/SD data/SD address/SCLK)
(3)
Vout = 2.4 V –8 mA
I
OL
Output current (Y/SD data/SD address/SCLK) Vout = 0.4 V 8 mA
I
OH
Output current (SDRAM_CLK) Vout = 2.4 V –8 mA
I
OL
Output current (SDRAM_CLK) Vout = 0.4 V 8 mA
I
OH
Output current (C) Vout = 2.4 V –4 mA
I
OL
Output current (C) Vout = 0.4 V 4 mA
T
A
Operating free-air temperature 0 70 °C
Analog
Output voltage 2.0 2.4 V
out
(1) Exception: 0.7 AVDD18 for XIN terminal
(2) Exception: 0.3 AVDD18 for XIN terminal
(3) Currents out of a terminal are given as a negative number
Copyright © 2005–2011, Texas Instruments Incorporated Electrical Specifications 97
Submit Documentation Feedback
focus.ti.com: TVP5160