Datasheet
TVP5160
SLES135E–FEBRUARY 2005–REVISED APRIL 2011
www.ti.com
6.3 Crystal Specifications
CYSTAL SPECIFICATION MIN NOM MAX UNIT
Frequency 14.31818 MHz
Frequency tolerance
(1)
–50 50 ppm
(1) This number is the required specification for the external crystal/oscillator and is not tested.
6.4 DC Electrical Characteristics
For minimum/maximum values: IOVDD = 3.0 V to 3.6 V, DVDD = 1.65 V to 1.95 V, AV
DD33
= 3.0 V to 3.6 V, AV
DD18
= 1.65 V
to 1.95 V, T
A
= 0°C to 70°C. For typical values: IOVDD = 3.3 V, DVDD = 1.8 V, AV
DD33
= 3.3 V, AV
DD18
= 1.8 V, T
A
= 25°C
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
CVBS, 3DYC, 3DNR 28 33
S-Video, 3DNR 23 27
I
DD(IOD)
3.3-V IO digital supply current
(1)
mA
SCART 33 39
480p/525p 52 63
CVBS 159 190
S-Video 156 187
I
DD(D)
1.8-V digital supply current mA
SCART 172 206
480p/525p 205 246
CVBS 18 21
S-Video 31 37
I
DD(33A)
3.3-V analog supply current mA
SCART 38 45
480p/525p 35 42
CVBS 80 96
S-Video 136 163
I
DD(18A)
1.8-V analog supply current mA
SCART 138 165
480p/525p 138 165
CVBS, 3DYC, 3DNR 582 698
S-Video, 3DNR 704 845
Total power dissipation, normal
P
TOT
mW
operation
SCART 792 950
480p/525p 904 1085
P
SAVE
Total power dissipation, power save 180 mW
P
DOWN
Total power dissipation, power down 3 mW
I
lkg
Input leakage current
(1)
10 µA
C
I
Input capacitance by design (not tested) 8 pF
Output voltage high
V
OH
I
OH
= –8 mA 0.8 IOVDD V
(Y/SD data/SD address/SCLK)
Output voltage low
V
OL
I
OL
= 8 mA 0.2 IOVDD V
(Y/SD data/SD address/SCLK)
V
OH
Output voltage high (SDRAM_CLK) I
OH
= –8 mA 0.8 IOVDD V
V
OL
Output voltage LOW (SDRAM_CLK) I
OL
= 8 mA 0.2 IOVDD V
V
OH
Output voltage HIGH (C) I
OH
= –4 mA 0.8 IOVDD V
V
OL
Output voltage LOW (C) I
OL
= 4 mA 0.2 IOVDD V
(1) GLCO and GPIO are bidirectional pins with an internal pulldown resistor during reset. These pins may sink up to 30 µA during reset.
98 Electrical Specifications Copyright © 2005–2011, Texas Instruments Incorporated
Submit Documentation Feedback
focus.ti.com: TVP5160