Datasheet

GND
VD
+3.3 V
Use these two pins
for external supply
Default:
Jump these two if
using +3.3 V LDO
GND
+5 VP
+5 V
Use these two pins
for external supply
Default:
Jump these two if
using on-board +5 V
GND
-5 VN
-5 V
Use these two pins
for external supply
Default:
Jump these two if
using on-board -5 V
www.ti.com PCB Layout
Figure 8. Jumper J43
Figure 9. Jumper J53
Figure 10. Jumper J54
4 PCB Layout
Figure 11 through Figure 14 illustrate this four-layer, printed-circuit board.
7
SLLU141A–March 2011–Revised May 2011 TX810, 8-Channel, Current-Programmable, Low-Noise, Transmit/Receive Switch
Evaluation Module
Submit Documentation Feedback
Copyright © 2011, Texas Instruments Incorporated