Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLogic ICsLogic IC - Transducer Converter, Bidirectional, Open Drain SOIC 14

RGY PACKAGE

(TOP VIEW)

1 14

7 8

GND

CCB

NC − No internal connection

D OR PW PACKAGE

(TOP VIEW)

NC − No internal connection

GND

CCA

CCB

CCA

GXU/ZXU (BGA) PACKAGE

(TOP VIEW)

A B C

TXS0104E

www.ti.com

SCES651E –JUNE 2006–REVISED AUGUST 2013

4-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR

FOR OPEN-DRAIN AND PUSH-PULL APPLICATIONS

Check for Samples: TXS0104E

FEATURES

• No Direction-Control Signal Needed

• IEC 61000-4-2 ESD (B Port)

• Max Data Rates – ±8-kV Contact Discharge

– 24 Mbps (Push Pull) – ±10-kV Air-Gap Discharge

– 2 Mbps (Open Drain)

• Available in the Texas Instruments NanoFree™

Package

• 1.65 V to 3.6 V on A port and 2.3 V to 5.5 V on

B port (V

CCA

≤ V

CCB

)

• No Power-Supply Sequencing Required – V

CCA

or V

CCB

Can Be Ramped First

• Latch-Up Performance Exceeds 100 mA Per

JESD 78, Class II

• ESD Protection Exceeds JESD 22

TERMINAL ASSIGNMENTS

– A Port

(GXU/ZXU Package)

– 2000-V Human-Body Model (A114-B)

A B C

– 200-V Machine Model (A115-A)

4 A4 GND B4

– 1000-V Charged-Device Model (C101)

3 A3 OE B3

– B Port

2 A2 V

CCA

1 A1 V

CCB

– 15-kV Human-Body Model (A114-B)

– 200-V Machine Model (A115-A)

– 1000-V Charged-Device Model (C101)

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

2NanoFree is a trademark of Texas Instruments.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (26 pages)

PAGE 1
TXS0104E www.ti.
PAGE 2
TXS0104E SCES651E – JUNE 2006 – REVISED AUGUST 2013 www.ti.com TERMINAL ASSIGNMENTS (YZT Package) YZT (WCSP) PACKAGE (TOP VIEW) 3 2 1 D C B A 3 2 1 D A4 GND B4 C A3 OE B3 B A2 VCCA B2 A A1 VCCB B1 DESCRIPTION This 4-bit non-inverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.65 V to 3.6 V. VCCA must be less than or equal to VCCB. The B port is designed to track VCCB.
PAGE 3
TXS0104E www.ti.com SCES651E – JUNE 2006 – REVISED AUGUST 2013 Absolute Maximum Ratings (1) over operating free-air temperature range (unless otherwise noted) VCCA VCCB MIN MAX –0.5 4.6 –0.5 6.5 A port –0.5 4.6 B port –0.5 6.5 A port –0.5 4.6 B port –0.5 6.5 A port –0.5 VCCA + 0.5 B port –0.5 VCCB + 0.
PAGE 4
TXS0104E SCES651E – JUNE 2006 – REVISED AUGUST 2013 Electrical Characteristics (1) www.ti.com (2) (3) over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VCCA VCCB TA = 25°C MIN TA = 25°C to 85°C TYP MAX MIN MAX VOHA IOH = –20 μA, VIB ≥ VCCB – 0.4 V 1.65 V to 3.6 V 2.3 V to 5.5 V VOLA IOL = 1 mA, VIB ≤ 0.15 V 1.65 V to 3.6 V 2.3 V to 5.5 V VOHB IOH = –20 μA, VIA ≥ VCCA – 0.2 V 1.65 V to 3.6 V 2.3 V to 5.
PAGE 5
TXS0104E www.ti.com SCES651E – JUNE 2006 – REVISED AUGUST 2013 Timing Requirements over recommended operating free-air temperature range, VCCA = 1.8 V ± 0.15 V (unless otherwise noted) VCCB = 2.5 V ± 0.2 V MIN Data rate tw Pulse duration MAX Push-pull driving Open-drain driving Push-pull driving Open-drain driving Data inputs VCCB = 3.3 V ± 0.3 V MIN VCCB = 5 V ± 0.
PAGE 6
TXS0104E SCES651E – JUNE 2006 – REVISED AUGUST 2013 www.ti.com Switching Characteristics over recommended operating free-air temperature range, VCCA = 1.8 V ± 0.15 V (unless otherwise noted) PARAMETER FROM (INPUT) TO (OUTPUT) VCCB = 2.5 V ± 0.2 V MIN Push-pull driving tPHL A B tPLH Open-drain driving A ten OE A or B tdis OE A or B tPLH Open-drain driving 45 trA A-port rise time trB B-port rise time tfA A-port fall time Channel-to-channel skew Max data rate 5.3 6.
PAGE 7
TXS0104E www.ti.com SCES651E – JUNE 2006 – REVISED AUGUST 2013 Switching Characteristics over recommended operating free-air temperature range, VCCA = 2.5 V ± 0.2 V (unless otherwise noted) PARAMETER FROM (INPUT) TO (OUTPUT) TEST CONDITIONS VCCB = 2.5 V ± 0.
PAGE 8
TXS0104E SCES651E – JUNE 2006 – REVISED AUGUST 2013 www.ti.com Switching Characteristics over recommended operating free-air temperature range, VCCA = 3.3 V ± 0.3 V (unless otherwise noted) PARAMETER FROM (INPUT) TO (OUTPUT) VCCB = 3.3 V ± 0.
PAGE 9
TXS0104E www.ti.com SCES651E – JUNE 2006 – REVISED AUGUST 2013 PRINCIPLES OF OPERATION Applications The TXS0104E can be used in level-translation applications for interfacing devices or systems operating at different interface voltages with one another. The TXS0104E is ideal for use in applications where an open-drain driver is connected to the data I/Os.
PAGE 10
TXS0104E SCES651E – JUNE 2006 – REVISED AUGUST 2013 www.ti.
PAGE 11
TXS0104E www.ti.com SCES651E – JUNE 2006 – REVISED AUGUST 2013 PARAMETER MEASUREMENT INFORMATION (continued) Figure 2.
PAGE 12
TXS0104E SCES651E – JUNE 2006 – REVISED AUGUST 2013 www.ti.com REVISION HISTORY Changes from Revision D (May 2008) to Revision E • 12 Page Removed Ordering Information Table. .................................................................................................................................
PAGE 13
PACKAGE OPTION ADDENDUM www.ti.
PAGE 14
PACKAGE OPTION ADDENDUM www.ti.com 31-Aug-2013 Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
PAGE 15
PACKAGE MATERIALS INFORMATION www.ti.com 31-Aug-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing TXS0104EDR SOIC SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) D 14 2500 330.0 16.4 6.5 B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 9.0 2.1 8.0 16.0 Q1 TXS0104EPWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 TXS0104ERGYR VQFN RGY 14 3000 330.0 12.4 3.75 3.75 1.15 8.0 12.
PAGE 16
PACKAGE MATERIALS INFORMATION www.ti.com 31-Aug-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TXS0104EDR SOIC D 14 2500 367.0 367.0 38.0 TXS0104EPWR TSSOP PW 14 2000 367.0 367.0 35.0 TXS0104ERGYR VQFN RGY 14 3000 367.0 367.0 35.0 TXS0104EYZTR DSBGA YZT 12 3000 182.0 182.0 17.0 TXS0104EZXUR BGA MICROSTAR JUNIOR ZXU 12 2500 338.1 338.1 20.
PAGE 17
PAGE 18
PAGE 19
PAGE 20
PAGE 21
PAGE 22
PAGE 23
PAGE 24
PAGE 25
D: Max = 1.89 mm, Min = 1.83 mm E: Max = 1.39 mm, Min = 1.
PAGE 26
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.