Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsLogic ICsLogic IC - Converter Converter DSBGA 20 (1.96x1.56)

YFP PACKAGE

(TOP VIEW)

TXS0206

www.ti.com

SCES697C –AUGUST 2009–REVISED JANUARY 2010

MMC, SD CARD, Memory Stick™ VOLTAGE-TRANSLATION TRANSCEIVER

WITH ESD PROTECTION AND EMI FILTERING

Check for Samples: TXS0206

FEATURES

• Level Translator

– V

CCA

and V

CCB

Range of 1.1 V to 3.6 V

– Fast Propagation Delay (4 ns Max When

Translating Between 1.8 V and 3 V)

• Integrated EMI Filtering and ESD Protection

Circuitry

• ESD Protection Exceeds JESD 22 (A Port)

– 2500-V Human-Body Model (A114-B)

TERMINAL ASSIGNMENTS

– 250-V Machine Model (A115-A)

1 2 3 4

– 1500-V Charged-Device Model (C101)

A DAT2A V

CCA

WP DAT2B

• ±8-kV Contact Discharge IEC 61000-4-2 ESD

B DAT3A CD V

CCB

DAT3B

(B-port)

C CMDA GND GND CMDB

D DAT0A CLKA CLKB DAT0B

E DAT1A CLK-f EN DAT1B

DESCRIPTION/ORDERING INFORMATION

The TXS0206 is a level shifter for interfacing microprocessors with MultiMediaCards (MMCs), secure digital (SD)

cards, and Memory Stick™ cards. It includes a high-speed level translator along with ESD protection and EMI

filtering circuitry.

The voltage-level translator has two supply voltage pins. V

CCA

as well as V

CCB

can be operated over the full

range of 1.1 V to 3.6 V. The TXS0206 enables system designers to easily interface applications processors or

digital basebands to memory cards and SDIO peripherals operating at a different I/O voltage level.

Memory card standards recommend high-ESD protection for devices that connect directly to the external memory

card. To meet this need, the TXS0206 incorporates ±8-kV Contact Discharge protection on the card side.

The TXS0206 is offered in a 20-bump wafer chip scale package (WCSP). This package has dimensions of

1.96 mm × 1.56 mm, with a 0.4-mm ball pitch for effective board-space savings. Memory cards are widely used

in mobile phones, PDAs, digital cameras, personal media players, camcorders, set-top boxes, etc. Low static

power consumption and small package size make the TXS0206 an ideal choice for these applications.

ORDERING INFORMATION

(1)

PACKAGE

(2)

ORDERABLE PART NUMBER TOP-SIDE MARKING

(3)

–40°C to 85°C WCSP – YFP (Pb-free) Tape and reel TXS0206YFPR _ _ _3T_

(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI

web site at www.ti.com.

(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.

(3) YFP: The actual top-side marking has three preceding characters to denote year, month, and sequence code, and one following

character to designate the assembly/test site. Pin 1 identifier indicates solder-bump composition (1 = SnPb, •= Pb-free).

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas

Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

2All trademarks are the property of their respective owners.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (30 pages)

PAGE 1
TXS0206 www.ti.com SCES697C – AUGUST 2009 – REVISED JANUARY 2010 MMC, SD CARD, Memory Stick™ VOLTAGE-TRANSLATION TRANSCEIVER WITH ESD PROTECTION AND EMI FILTERING Check for Samples: TXS0206 FEATURES 1 • 2 • • • Level Translator – VCCA and VCCB Range of 1.1 V to 3.6 V – Fast Propagation Delay (4 ns Max When Translating Between 1.
PAGE 2
TXS0206 SCES697C – AUGUST 2009 – REVISED JANUARY 2010 www.ti.com REFERENCE DESIGN VCCA VCCB C3 0.1 µF U1A VCCB C4 0.1 µF C1 0.
PAGE 3
TXS0206 www.ti.com SCES697C – AUGUST 2009 – REVISED JANUARY 2010 VCCA VCCB C3 0.1 µF U1A VCCB C4 0.1 µF C1 0.
PAGE 4
TXS0206 SCES697C – AUGUST 2009 – REVISED JANUARY 2010 www.ti.com ESD – ±8-kV Contact Discharge ESD – 2 kV 1.8 V A Side B Side 2.9 V CLK CLK Feedback CLK CMD CMD Data 0–3 CPU Data 0–3 Level-Shifter Integrated ASIP Antenna Pins 10, 11 EN WP, CD MMC, SD Card, or MS Card WP, CD 1.8-V Pullup WP, CD Integrated Pullup/Pulldown Resistors Figure 3.
PAGE 5
TXS0206 www.ti.com SCES697C – AUGUST 2009 – REVISED JANUARY 2010 TERMINAL FUNCTIONS TERMINAL TYPE DESCRIPTION NO. NAME A1 DAT2A I/O Data bit 2 connected to host. Referenced to VCCA. Includes a 40-kΩ pullup resistor to VCCA. A2 VCCA Pwr A-port supply voltage. VCCA powers all A-port I/Os and control inputs. A3 WP O Connected to write protect on the mechanical connector. The WP pin has an internal 100-kΩ pullup resistor to VCCA. A4 DAT2B I/O Data bit 2 connected to memory card.
PAGE 6
TXS0206 SCES697C – AUGUST 2009 – REVISED JANUARY 2010 www.ti.
PAGE 7
TXS0206 www.ti.com SCES697C – AUGUST 2009 – REVISED JANUARY 2010 VCCB R7 R8 R9 R10 R11 HOST CARD R1 CLKB CLK R2 CMD CMDB R3 Data0 DAT0B R4 DAT1B Data1 R5 DAT2B Data2 R6 Data3 DAT3B GND GND RESISTORS BIDIRECTIONAL ZENER DIODES R1, R2, R3, R4, R5, R6 40 Ω Vbr min 14 V at 1 mA Tolerance ±20% Line capacitance <20 pF R7, R8, R9, R10, R11 40 kΩ Tolerance ±30% Figure 5. ASIP Block Diagram VCCA RCD RWP WP CD RESISTORS RWP, RCD 100 kΩ Tolerance ±30% Figure 6.
PAGE 8
TXS0206 SCES697C – AUGUST 2009 – REVISED JANUARY 2010 www.ti.com ABSOLUTE MAXIMUM RATINGS (1) Level Translator over operating free-air temperature range (unless otherwise noted) MIN MAX UNIT VCCA Supply voltage range –0.5 4.6 V VCCB Supply voltage range –0.5 4.6 V I/O ports (A port) –0.5 4.6 I/O ports (B port) –0.5 4.6 Control inputs –0.5 4.6 A port –0.5 4.6 B port –0.5 4.6 A port –0.5 4.6 B port –0.5 4.
PAGE 9
TXS0206 www.ti.com SCES697C – AUGUST 2009 – REVISED JANUARY 2010 RECOMMENDED OPERATING CONDITIONS (1) Level Translator MIN MAX VCCA Supply voltage VCCA 1.1 3.6 V VCCB Supply voltage 1.1 3.6 V VIH High-level input voltage VCCI – 0.2 VCCI VCCI x 0.65 VCCI 0 0.15 Low-level input voltage VIL VO Output voltage IOH A-Port CMD and DATA I/Os B-Port CMD and DATA I/Os 1.1 V to 1.95 V 1.1 V to 1.95 V 1.95 V to 3.6 V 1.95 V to 3.6 V EN and CLKA 1.1 V to 3.6 V 1.1 V to 3.
PAGE 10
TXS0206 SCES697C – AUGUST 2009 – REVISED JANUARY 2010 www.ti.com ELECTRICAL CHARACTERISTICS Level Translator over recommended operating free-air temperature range (unless otherwise noted) PARAMETER A port (CLK-f output) VOH A port (DAT and CMD outputs) A port (CLK-f output) VOL A port (DAT and CMD outputs) TEST CONDITIONS VCCA VCCB MIN IOH = –100 μA 1.1 V to 3.6 V IOH = –0.5 mA 1.1 V 0.8 IOH = –1 mA 1.4 V 1.05 IOH = –2 mA 1.65 V IOH = –4 mA 2.3 V IOH = –8 mA 3V IOH = –20 μA 1.
PAGE 11
TXS0206 www.ti.com SCES697C – AUGUST 2009 – REVISED JANUARY 2010 ELECTRICAL CHARACTERISTICS Level Translator (continued) over recommended operating free-air temperature range (unless otherwise noted) PARAMETER B port TEST CONDITIONS VCCA TYP (1) MAX 1.1 V to 3.6 V IOL = 0.5 mA 1.1 V 0.35 IOL = 1 mA 1.4 V 0.35 1.65 V 0.45 2.3 V 0.55 1.1 V to 3.6 V IOL = 2 mA IOL = 8 mA B port (DAT output) MIN IOL = 100 μA IOL = 4 mA VOL VCCB 3V 0.7 IOL = 135 μA 1.1 V to 3.6 V 0.
PAGE 12
TXS0206 SCES697C – AUGUST 2009 – REVISED JANUARY 2010 www.ti.com TIMING REQUIREMENTS VCCA = 1.2 V ± 0.1 V over recommended operating free-air temperature range (unless otherwise noted) VCCB = 1.2 V ± 0.1 V MIN Command Data rate Clock Data Command tW Pulse duration Clock Data VCCB = 1.5 V ± 0.1 V MAX MIN MAX VCCB = 1.8 V ± 0.15 V MIN VCCB = 2.5 V ± 0.2 V MAX MIN MAX VCCB = 3.3 V ± 0.3 V MIN UNIT MAX Push-pull driving 30 40 40 40 40 Open-drain driving 0.
PAGE 13
TXS0206 www.ti.com SCES697C – AUGUST 2009 – REVISED JANUARY 2010 TIMING REQUIREMENTS VCCA = 2.5 V ± 0.2 V over recommended operating free-air temperature range (unless otherwise noted) VCCB = 1.2 V ± 0.1 V MIN Command Data rate Clock Data Command tW Pulse duration Clock Data Push-pull driving MAX Push-pull driving Push-pull driving MAX MIN VCCB = 2.5 V ± 0.2 V MAX MIN MAX VCCB = 3.3 V ± 0.
PAGE 14
TXS0206 SCES697C – AUGUST 2009 – REVISED JANUARY 2010 www.ti.com SWITCHING CHARACTERISTICS VCCA = 1.2 V ± 0.1 V over recommended operating free-air temperature range (unless otherwise noted) PARAMETER FROM (INPUT) TO (OUTPUT) TEST CONDITIONS VCCB = 1.2 V ± 0.1 V MIN Push-pull driving CMDA CMDB ten tdis CMDB CMDA 15.3 MIN 10.4 UNIT MAX 10.8 3.4 11.5 3.3 10.6 3.2 10.3 Open-drain driving (L-to-H) 204 308 164 256 133 224 95 175 71 147 19.7 15.1 13.4 12 11.
PAGE 15
TXS0206 www.ti.com SCES697C – AUGUST 2009 – REVISED JANUARY 2010 SWITCHING CHARACTERISTICS VCCA = 1.5 V ± 0.1 V over recommended operating free-air temperature range (unless otherwise noted) PARAMETER FROM (INPUT) TO (OUTPUT) TEST CONDITIONS VCCB = 1.2 V ± 0.1 V MIN Push-pull driving CMDA CMDB ten tdis CMDB CMDA 12 6.9 MAX MIN 6.1 UNIT MAX 6 2.9 7.6 2.7 6.6 2.7 6.5 Open-drain driving (L-to-H) 192 297 191 295 157 252 112 180 83 138 15.2 9.8 8 6.8 6.
PAGE 16
TXS0206 SCES697C – AUGUST 2009 – REVISED JANUARY 2010 www.ti.com SWITCHING CHARACTERISTICS VCCA = 1.8 V ± 0.15 V over recommended operating free-air temperature range (unless otherwise noted) PARAMETER FROM (INPUT) TO (OUTPUT) TEST CONDITIONS VCCB = 1.2 V ± 0.1 V MIN Push-pull driving CMDA CMDB ten tdis CMDB CMDA 11.3 MIN 4.6 UNIT MAX 4.4 2.7 6.5 2.5 5.5 2.4 5.1 Open-drain driving (L-to-H) 179 286 183 288 168 286 121 201 89 151 13.2 8.3 6.5 5.2 4.
PAGE 17
TXS0206 www.ti.com SCES697C – AUGUST 2009 – REVISED JANUARY 2010 SWITCHING CHARACTERISTICS VCCA = 2.5 V ± 0.2 V over recommended operating free-air temperature range (unless otherwise noted) PARAMETER FROM (INPUT) TO (OUTPUT) TEST CONDITIONS VCCB = 1.2 V ± 0.1 V MIN Push-pull driving CMDA CMDB ten tdis CMDB CMDA trB tfA 2.1 4.1 Open-drain driving (L-to-H) 156 253 162 258 149 261 126 249 98 190 tfB Max data rate 2.3 7.9 2 5.7 1.9 4.
PAGE 18
TXS0206 SCES697C – AUGUST 2009 – REVISED JANUARY 2010 www.ti.com SWITCHING CHARACTERISTICS VCCA = 3.3 V ± 0.3 V over recommended operating free-air temperature range (unless otherwise noted) PARAMETER FROM (INPUT) TO (OUTPUT) TEST CONDITIONS VCCB = 1.2 V ± 0.1 V MIN Push-pull driving CMDA CMDB ten tdis CMDB CMDA 12.5 MIN 3.8 UNIT MAX 3.2 2.4 5.2 2.1 4.1 2 3.7 Open-drain driving (L-to-H) 136 212 141 235 129 235 112 233 101 201 10.7 6.6 5.1 3.
PAGE 19
TXS0206 www.ti.com SCES697C – AUGUST 2009 – REVISED JANUARY 2010 OPERATING CHARACTERISTICS TA = 25°C, VCCA = 1.2 V PARAMETER TEST CONDITIONS 1.5 V 1.8 V 2.5 V 3V 3.3 V 15 15 14.9 14.9 15 15 6.3 6.4 6.5 6.5 6.5 6.5 12.5 12.3 12.3 12.1 12 11.9 0.2 0.2 0.2 0.3 0.3 0.3 1.2 1.2 1.2 1.2 1.2 1.2 B-port input, DATA A-port Disabled output 0.2 0.2 0.2 0.3 0.3 0.3 A-port input, DATA B-port Enabled output 26.2 27.3 28.2 29.7 30 31.2 25.7 25.6 25.6 26.4 27 28.
PAGE 20
TXS0206 SCES697C – AUGUST 2009 – REVISED JANUARY 2010 www.ti.com OPERATING CHARACTERISTICS (continued) TA = 25°C, VCCA = 1.5 V PARAMETER TEST CONDITIONS A-port input, DATA B-port Enabled output CpdB (1) CLK B-port input, Enabled A-port DATA output Enabled A-port input, DATA B-port Disabled output CL = 0, f = 10 MHz, tr = tf = 1 ns VCCB TYP 1.2 V 1.5 V 1.8 V 2.5 V 3V 3.3 V 25.8 26.3 27.3 29.2 29.2 30.6 25.8 25.6 25.6 26.2 26.2 27.2 13.7 12.3 11.4 12 12 12.8 UNIT pF 0.1 0.
PAGE 21
TXS0206 www.ti.com SCES697C – AUGUST 2009 – REVISED JANUARY 2010 OPERATING CHARACTERISTICS TA = 25°C, VCCA = 2.5 V PARAMETER TEST CONDITIONS 1.5 V 1.8 V 2.5 V 3V 3.3 V 16.2 16 15.9 15.8 15.8 15.7 7.3 6.5 5.9 5.5 5.4 5.3 15.3 14.6 14 13 12.8 12.5 0.1 0.1 0.1 0.1 0.1 0.1 1.3 1.3 1.3 1.3 1.3 1.3 B-port input, DATA A-port Disabled output 0.1 0.1 0.1 0.1 0.1 0.1 A-port input, DATA B-port Enabled output 25.6 25.8 26.2 27.6 29 29.5 25.9 25.7 25.7 26.2 26.
PAGE 22
TXS0206 SCES697C – AUGUST 2009 – REVISED JANUARY 2010 www.ti.com OPERATING CHARACTERISTICS (continued) TA = 25°C, VCCA = 3.3 V PARAMETER TEST CONDITIONS A-port input, DATA B-port Enabled output CpdB (1) CLK B-port input, Enabled A-port DATA output Enabled A-port input, DATA B-port Disabled output CL = 0, f = 10 MHz, tr = tf = 1 ns 1.2 V 1.5 V 1.8 V 2.5 V 3V 3.3 V 25.2 25.6 26 27.1 28 28.5 26 25.8 25.8 26.3 26.8 27 13.7 12.1 11.4 12.2 12.7 13.2 UNIT pF 0.3 0.1 0.1 0.1 0.
PAGE 23
TXS0206 www.ti.
PAGE 24
TXS0206 SCES697C – AUGUST 2009 – REVISED JANUARY 2010 www.ti.com PARAMETER MEASUREMENT INFORMATION (continued) Figure 8.
PAGE 25
TXS0206 www.ti.com SCES697C – AUGUST 2009 – REVISED JANUARY 2010 APPLICATION INFORMATION The TXS0206 has integrated pullup resistors on the data and command ports and their values dynamically change. When the port is in a low signal state, there is a nominal pullup resistor value of 40 kΩ, and power consumption is minimized. When the port is in a high signal state, the nominal pullup resistor value changes to 4 kΩ, and simultaneous switching performance is improved as a result.
PAGE 26
PACKAGE OPTION ADDENDUM www.ti.com 20-May-2013 PACKAGING INFORMATION Orderable Device Status (1) TXS0206YFPR ACTIVE Package Type Package Pins Package Drawing Qty DSBGA YFP 20 3000 Eco Plan Lead/Ball Finish (2) Green (RoHS & no Sb/Br) MSL Peak Temp Op Temp (°C) Device Marking (3) SNAGCU Level-1-260C-UNLIM (4/5) -40 to 85 3T2 (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs.
PAGE 27
PACKAGE MATERIALS INFORMATION www.ti.com 29-Jun-2009 TAPE AND REEL INFORMATION *All dimensions are nominal Device TXS0206YFPR Package Package Pins Type Drawing SPQ DSBGA 3000 YFP 20 Reel Reel Diameter Width (mm) W1 (mm) 180.0 8.4 Pack Materials-Page 1 A0 (mm) B0 (mm) K0 (mm) P1 (mm) 1.65 2.05 0.6 4.0 W Pin1 (mm) Quadrant 8.
PAGE 28
PACKAGE MATERIALS INFORMATION www.ti.com 29-Jun-2009 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) TXS0206YFPR DSBGA YFP 20 3000 220.0 220.0 34.
PAGE 29
D: Max = 1.988 mm, Min =1.928 mm E: Max = 1.588 mm, Min =1.
PAGE 30
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.