Datasheet

ManualsBrandsTEXAS INSTRUMENTS ManualsPMICsPMIC - LDO voltage regulator Positive, fixed TO 252 3

DCY (SOT-223) PACKAGE

(TOP VIEW)

OUTPUT

COMMON

INPUT

COMMON

KTP (PowerFLEX /TO-252*) PACKAGE

(TOP VIEW)

OUTPUT

COMMON

INPUT

COMMON

* Complies with JEDEC TO-252, variation AC

COMMON

OUTPUT

KCS (TO-220) PACKAGE

(TOP VIEW)

INPUT

COMMON

OUTPUT

KC (TO-220) PACKAGE

(TOP VIEW)

INPUT

COMMON

KVU (TO-252) PACKAGE

(TOP VIEW)

COMMON

OUTPUT

INPUT

COMMON

uA78M00 SERIES

www.ti.com

SLVS059S –JUNE 1976–REVISED MAY 2013

POSITIVE-VOLTAGE REGULATORS

Check for Samples: uA78M00 SERIES

FEATURES

• 3-Terminal Regulators

• High Power-Dissipation Capability

• Output Current up to 500 mA • Internal Short-Circuit Current Limiting

• No External Components • Output Transistor Safe-Area Compensation

• Internal Thermal-Overload Protection

DESCRIPTION

This series of fixed-voltage integrated-circuit voltage regulators is designed for a wide range of applications.

These applications include on-card regulation for elimination of noise and distribution problems associated with

single-point regulation. Each of these regulators can deliver up to 500 mA of output current. The internal current-

limiting and thermal-shutdown features of these regulators essentially make them immune to overload. In

addition to use as fixed-voltage regulators, these devices can be used with external components to obtain

adjustable output voltages and currents and also as the power-pass element in precision regulators.

ORDERING INFORMATION

For package and ordering information, see the Package Option Addendum at the end of this document.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

2PowerPAD is a trademark of Texas Instruments.

PRODUCTION DATA information is current as of publication date.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Summary of content (22 pages)

PAGE 1
uA78M00 SERIES www.ti.
PAGE 2
uA78M00 SERIES SLVS059S – JUNE 1976 – REVISED MAY 2013 www.ti.com SCHEMATIC INPUT 140 kΩ 96 Ω 0.6 Ω OUTPUT 0 to 20 kΩ 5.4 kΩ COMMON Resistor values shown are nominal.
PAGE 3
uA78M00 SERIES www.ti.com SLVS059S – JUNE 1976 – REVISED MAY 2013 Absolute Maximum Ratings (1) over virtual junction temperature range (unless otherwise noted) MIN VI Input voltage TJ Operating virtual junction temperature Tstg Storage temperature range (1) MAX –65 UNIT 35 V 150 °C 150 °C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device.
PAGE 4
uA78M00 SERIES SLVS059S – JUNE 1976 – REVISED MAY 2013 www.ti.com Electrical Characteristics at specified virtual junction temperature, VI = 8 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) uA78M33C TEST CONDITIONS (1) PARAMETER MIN TYP MAX 3.2 3.3 3.4 3.1 3.3 3.5 VI = 5.
PAGE 5
uA78M00 SERIES www.ti.com SLVS059S – JUNE 1976 – REVISED MAY 2013 Electrical Characteristics at specified virtual junction temperature, VI = 10 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) Output voltage IO = 5 mA to 350 mA, VI = 7 V to 20 V Input voltage regulation IO = 200 mA Ripple rejection VI = 8 V to 18 V, f = 120 Hz Output voltage regulation uA78M05I TEST CONDITIONS (1) PARAMETER TJ = –40°C to 125°C MIN TYP 4.8 5 4.
PAGE 6
uA78M00 SERIES SLVS059S – JUNE 1976 – REVISED MAY 2013 www.ti.com Electrical Characteristics at specified virtual junction temperature, VI = 14 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) Output voltage VI = 10.5 V to 23 V, Input voltage regulation IO = 200 mA Ripple rejection VI = 11 V to 21.5 V, f = 120 Hz Output voltage regulation uA78M08C TEST CONDITIONS (1) PARAMETER IO = 5 mA to 350 mA MIN 7.
PAGE 7
uA78M00 SERIES www.ti.com SLVS059S – JUNE 1976 – REVISED MAY 2013 Electrical Characteristics at specified virtual junction temperature, VI = 17 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) Output voltage VI = 12.5 V to 25 V, Input voltage regulation IO = 200 mA Ripple rejection VI = 15 V to 25 V, f = 120 Hz Output voltage regulation uA78M10C TEST CONDITIONS (1) PARAMETER IO = 5 mA to 350 mA MIN 9.
PAGE 8
uA78M00 SERIES SLVS059S – JUNE 1976 – REVISED MAY 2013 www.ti.com REVISION HISTORY Changes from Revision Q (April 2010) to Revision R • Removed obsolete part information from document. ............................................................................................................ 1 Changes from Revision R (February 2013) to Revision S • 8 Page Page Removed ordering information table. ........................................................................................................
PAGE 9
PACKAGE OPTION ADDENDUM www.ti.
PAGE 10
PACKAGE OPTION ADDENDUM www.ti.
PAGE 11
PACKAGE OPTION ADDENDUM www.ti.
PAGE 12
PACKAGE OPTION ADDENDUM www.ti.com 21-May-2013 (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined.
PAGE 13
PACKAGE MATERIALS INFORMATION www.ti.com 29-May-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device UA78M05CDCYR Package Package Pins Type Drawing SPQ SOT-223 Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) DCY 4 2500 330.0 12.4 B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 7.05 7.4 1.9 8.0 12.0 Q3 UA78M05CKVURG3 TO-252 KVU 3 2500 330.0 16.4 6.9 10.5 2.7 8.0 16.0 Q2 UA78M05IDCYR SOT-223 DCY 4 2500 330.0 12.4 7.05 7.4 1.9 8.0 12.
PAGE 14
PACKAGE MATERIALS INFORMATION www.ti.com 29-May-2013 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) UA78M05CDCYR SOT-223 DCY 4 2500 340.0 340.0 38.0 UA78M05CKVURG3 TO-252 KVU 3 2500 340.0 340.0 38.0 UA78M05IDCYR SOT-223 DCY 4 2500 340.0 340.0 38.0 UA78M05IKVURG3 TO-252 KVU 3 2500 340.0 340.0 38.0 UA78M06CKVURG3 TO-252 KVU 3 2500 340.0 340.0 38.0 UA78M08CDCYR SOT-223 DCY 4 2500 340.0 340.
PAGE 15
MECHANICAL DATA MPDS094A – APRIL 2001 – REVISED JUNE 2002 DCY (R-PDSO-G4) PLASTIC SMALL-OUTLINE 6,70 (0.264) 6,30 (0.248) 3,10 (0.122) 2,90 (0.114) 4 0,10 (0.004) M 3,70 (0.146) 3,30 (0.130) 7,30 (0.287) 6,70 (0.264) Gauge Plane 1 2 0,84 (0.033) 0,66 (0.026) 2,30 (0.091) 4,60 (0.181) 1,80 (0.071) MAX 3 0°–10° 0,10 (0.004) M 0,25 (0.010) 0,75 (0.030) MIN 1,70 (0.067) 1,50 (0.059) 0,35 (0.014) 0,23 (0.009) Seating Plane 0,08 (0.003) 0,10 (0.0040) 0,02 (0.0008) 4202506/B 06/2002 NOTES: A. B.
PAGE 16
PAGE 17
MECHANICAL DATA MPSF001F – JANUARY 1996 – REVISED JANUARY 2002 KTP (R-PSFM-G2) PowerFLEX PLASTIC FLANGE-MOUNT PACKAGE 0.080 (2,03) 0.070 (1,78) 0.243 (6,17) 0.233 (5,91) 0.228 (5,79) 0.218 (5,54) 0.050 (1,27) 0.040 (1,02) 0.010 (0,25) NOM 0.130 (3,30) NOM 0.215 (5,46) NOM 0.247 (6,27) 0.237 (6,02) Thermal Tab (See Note C) 0.287 (7,29) 0.277 (7,03) 0.381 (9,68) 0.371 (9,42) 0.100 (2,54) 0.090 (2,29) 0.032 (0,81) MAX Seating Plane 0.090 (2,29) 0.180 (4,57) 0.004 (0,10) 0.005 (0,13) 0.
PAGE 18
PAGE 19
PAGE 20
PAGE 21
PAGE 22
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.