User's Manual

5.3.5.3 Running PC-Doctor

PC-Doctor is a DOS-resident program that can be run from either hard disk

or from the bootable diskette you previously created.

. From the C:\ prompt change directory (type

CD C:\PCDR

) and press

Enter

. The Diagnostics Program loads into system memory, and the LCD

displays the diagnostics Header.

Note:

There are a number of command-line switches that can be entered

when starting up PC-Doctor to enable automatic virus scanning, enable

loopback testing of serial/parallel ports, work from the remote menu if per-

forming remote operations, etc. To get a listing of the available command-

line switches, startup PC-Doctor with the following command:

PCDR /?

and

press

Enter

Note:

If PC-Doctor detects a virus, it will stop with an error message. You

must then use one of the standard virus detection and removal programs to

remove the virus.

5.3.5.4 Quitting PC-Doctor

To exit PC-Doctor, select the

Quit

pull down menu and then select the

Quit

to DOS

option.

Note:

For additional information, press

twice

to access the online Refer-

ence manual for PC-Doctor.

5-10

Troubleshooting Procedures