Operation Manual

Cause
Solution
A-Insufficient oil to pump
Check oil level in reservoir
B-Air in oil
Check oil level in reservoir
C-Excessive pump inlet vacuum
Check pump inlet hose for blockage or kinks
D-Blocked hydraulic lines
Flush and clean the splitter hydraulic
system
E-Blocked control valve
Flush and clean the splitter hydraulic
system
F-Low control valve setting
Adjust control valve with a pressure gauge
G-High control valve setting
Adjust control valve with a pressure gauge
H-Damaged control valve
Return control valve for authorized repair
I-Internal control valve leak
Return control valve for authorized repair
J-Internal cylinder leak
Return cylinder for authorized repair
K-Internally damaged cylinder
Return cylinder for authorized repair
L-Engine Control out of adjustment
Adjust idle control nuts
M-Engine is loaded during idle down mode
Use shorter log length (24” or less) to allow
engine to speed up before contact.
Specifications
Model
Power Split 2000HV
Engine
Texas Power Line TG720 – 212 cc
Maximum Pressure
20 ton
Hydraulic Fluid Capacity
2.5 gallons or the level of the oil in the
middle of oil window on oil tank.
Hydraulic Fluid Type
10wt AW32, ASLE H-150, or ISO32