Operation Manual

Maximum Towing Speed
30MPH
Maximum Log Length
24 in
Maximum Log Weight
100 lb
Hydraulic Cylinder Bore
4-1/2 in
Hydraulic Cylinder Stroke
23 in
Maximum Log Diameter
12in
The manufacturer reserves the right to make improvements in design and/or changes in
specifications at any time without incurring any obligation to install them on units
previously sold.
Assembly
Open Shipping Crate
1. Set the shipping Crate on a solid, flat surface.
2. Carefully cut the shipping bands and remove lid of shipping crate.
3. Using two people to lift, carefully remove the engine, oil tank, wheels, tow bar, support
legs, and hardware. (For parts reference see page16-18 in manual)
4. Leave the hydraulic cylinder/log cradle in the shipping crate until step 6 in the assembly
process.
5. Locate all hardware before beginning assembly.
Fix the wheel to the oil tank (#39)
axle by a flat washer Ø20 (#25),
slotted nut M16x1.5 (#88), cotter
pin Ø4x36 (#52) and attach the
axle cap (#101).