Operation Manual

17
Maintenance and Storage
WARNING
Improper maintenance and storage of the drop spreader may void your warranty.
MAINTENANCE
• After each use clean material out of hopper.
• Rinse/dry inside and outside of the spreader after each use.
• Periodically check all fasteners for tightness.
• Annually clean and lightly lubricate moving parts or as needed.
• Use a glossy enamel spray paint to touch up scratched or worn painted metal surfaces.
• Never exceed load capacity rating of 60lbs it will damage the spreader.
IMPORTANT:
If a part needs replacement, only use parts that meet the manufacturer’s specifications.
Replacement parts that do not meet specifications may result in a safety hazard or poor
operations.
STORAGE
• Never allow material to remain in the hopper for extended periods of time. Return unused
product to its original container.
• Before storing make sure the spreader is clean and dry for years of trouble free service.
• Store indoors or protected area during severe weather and winter months
Specifications
Load Capacity ............................................................................................................. 60lb (27.21kg)
Spreader Type .......................................................................................................................... Drop
Hopper Material .......................................................................................................... Polypropylene
Hopper Dimensions ................................................................ 23.6”x 11.6” x 9” (59.9x11.6x22.9cm)
Wheel Size.................................................................................................................... 10” (25.4cm)