User's Manual

4.9 USB Interrupt Mask Set Register (INTMSKSETR)
www.ti.com Registers
The USB Interrupt Mask Set Register (INTMSKSETR) is shown in Figure 24 and described in Table 25 .
Figure 24. USB Interrupt Mask Set Register (INTMSKSETR)
31 25 24 16
Reserved USB
R-0 W-0
15 13 12 8 7 5 4 0
Reserved RX Reserved TX
R-0 W-0 R-0 W-0
LEGEND: R = Read only; W = Write only; - n = value after reset
Table 25. USB Interrupt Mask Set Register (INTMSKSETR) Field Descriptions
Bit Field Value Description
31-25 Reserved 0 Reserved
24-16 USB 0-1FFh Write a 1 to set equivalent USB interrupt mask
Allows the USB interrupt masks to be individually enabled
15-13 Reserved 0 Reserved
12-8 RX 0-1Fh Write a 1 to set equivalent Receive endpoint interrupt mask
Allows the USB interrupt masks to be individually enabled
7-5 Reserved 0 Reserved
4-0 TX 0-Fh Write a 1 to set equivalent Transmit endpoint interrupt mask
Allows the USB interrupt masks to be individually enabled
SPRUGH3 – November 2008 Universal Serial Bus (USB) Controller 89
Submit Documentation Feedback