Datasheet

- 144 -

2 Form C, Top mounting

Outline Dimensions Mounting Holes

Remark: 1) In case of no tolerance shown in outline dimension: outline dimension ≤1mm, tolerance should be ±0.2mm; outline dimension >1mm

and ≤5mm, tolerance should be ±0.3mm; outline dimension >5mm, tolerance should be ±0.4mm.

2) The tolerance without indicating for PCB layout is always ±0.1mm.

6. CHARACTERISTIC

CURVES

Maximum Switching Power (1 Form C) Maximum Switching Power (2 Form C)