User Manual

INSTRUCTIONS

Item 15119 - Rotisserie Grill and Spit

Thank you for purchasing this Texsport grill and spit. Please read and understand each step of the set-up instructions. We

encourage you to set-up this tent at least once prior to your outdoor trip, ensuring that you have a satisfactory understanding of

the set-up process. We hope you enjoy your new grill and spit and that it will give you many years of outdoor pleasure.

PLEASE FOLLOW THE SEQUENCE OF IMAGES TO ASSEMBLE YOUR ROTISSERIE GRILL AND SPIT.

These are the parts you will need to assemble you rotisserie grill and spit

Grill Base with Chained Hooks

Skewer

Arm/Pot

Holders

“T” Legs

2 Bared

Skewer

Holder

Ringed

Skewer

Holder

STEP 1 - Lay grill base upside

down and insert the 2 “T” legs

into the square leg holders.

Secure slightly by turning the

screw clamp on each side of

the grill.

STEP 2 - Secure slightly by

turning the screw clamp on

each side of the grill.

STEP 3 - Flip assembly right

side up and slightly loosen the

screw clamps to lower the grill

base to desired position.

Tighten the screw clamps.

PAGE 1
INSTRUCTIONS Item 15119 - Rotisserie Grill and Spit Thank you for purchasing this Texsport grill and spit. Please read and understand each step of the set-up instructions. We encourage you to set-up this tent at least once prior to your outdoor trip, ensuring that you have a satisfactory understanding of the set-up process. We hope you enjoy your new grill and spit and that it will give you many years of outdoor pleasure. PLEASE FOLLOW THE SEQUENCE OF IMAGES TO ASSEMBLE YOUR ROTISSERIE GRILL AND SPIT.
PAGE 2
STEP 4 - Insert the chained pin into the “T” legs to secure the grill base completely. STEP 5 - Insert the 2 bared skewer joint to the top of the “T” leg and secure with the clamp screw. STEP 6 - Insert the ringed skewer joint to the top of the “T” leg and secure with the clamp screw. STEP 7 - Your skewer holder joints should be facing each other as pictured. STEP 8 - Insert the arm/hot holders into the skewer holder joints.