Instructions / Assembly
Page | 2
STEP ONE: ASSEMBLE THE FRAME
First you start with the frame:
1) Start from the top of the frame. It is
the longest Aluminum Frame that has
no rail.
2) Attach the side Aluminum Frames.
3) There are 4 Connectors on the
Frame. There should be two on top
and two on the bottom.
The jambs connect easily with a
simple connector piece built in
the frame.
Remove this screw from the
connector. Once you connect
the jambs, screw it back on.
The corners should connect
nicely and tight.
Make sure to tighten it up using
an Allen wrench.