Instructions

24
The transmission range is around 100 meters from the thermo-
hygro transmitter to the wireless thermo-hygrometer (in open
space). However, this depends on the surrounding environment
and interference levels. If no reception is possible despite the
observation of these factors, all system units have to be reset
(see “Setting up” above).
POSITIONING THE WIRELESS THERMO-
HYGROMETER
The wireless thermo-hygrometer provides the option of table
standing or wall mounting the unit. Before wall mounting,
please check that the outdoor data can be received from the
desired locations.
To wall mount:
1. Fix a screw (not supplied) into the
desired wall, leaving the head
extended out by about 5mm.
2. Place the Wireless thermo-hygrometer
onto the screw, using the hanging hole
on the backside. Gently pull the
Wireless thermo-hygrometer down to
lock the screw into place.
Foldout table stand:
The foldout table stand leg is located on
the backside. Pull the stand out from the
bottom center edge of the wireless
thermo-hygrometer, below the battery
compartment. Once the foldout table
stand is extended, place the Wireless
thermo-hygrometer in an appropriate
location.
POSITIONING THE THERMO-HYGRO TRANSMITTER
Mounting at a sheltered place. Avoid direct rain
and sunshine.
The thermo-hygro transmitter can be placed
onto any flat surface or wall mounted using the
bracket which doubles as a stand or wall mount
base.