Instructions

1716
Radio controlled clock with indoor temperature

6.1.2 DCF reception
• By default, the DCF reception is activated (RCC ON) and after successful reception of the DCF signal no manual adjustment
is necessary.
• Once the DCF time reception is deactivated (RCC OFF), the clock and date must be manually set.
• If the DCF reception is activated, the manually set time will be overwritten by the DCF time when the signal is received suc-
cessfully.
6.2 Time zone setting
• The time zone correction is needed for countries where the DCF signal can be received but the time zone is different from
the DCF time.
• Press and hold the DOWN button. F appears on the display.
• Press and hold the MODE button.
• The hour digit flashes. Press the UP or DOWN button to set the time with time zone correction (hours only).
• Confirm the setting with the MODE button.
• Press and hold the DOWN button again to return to normal mode. F disappears.
6.3 Switch seconds/calendar week
• Press and hold the UP button to toggle between seconds and calendar week.
7. Alarm time setting
• Press the MODE button in normal mode to enter the alarm mode. AL and the last adjusted alarm time appear on the dis-
play.
• Press and hold the MODE button for three seconds to enter the setting mode.
• The hour digits flash.
• Press the UP or DOWN button to adjust the hours.
• Confirm the setting with the MODE button and set minutes in the same way.
• Press the MODE button again to return to the current time.
• To activate/turn off the alarm, press ALARM button.
• The alarm symbol appears/disappears on the display.
• When the alarm is activated, the alarm starts to ring when the set alarm time is reached. The alarm symbol flashes.
• Press any button to activate the snooze function.
• The alarm will be interrupted for about 5 minutes.
• The snooze symbol flashes.
• Press again any button and the alarm will stop.
8. Battery replacement
• Change the batteries when the battery symbol appears on the display.
Radio controlled clock with indoor temperature

9. Troubleshooting
Problem Solution
No display ➜ Ensure the batteries' polarities are correct
➜ Change the batteries
No DCF reception ➜ Start the initialization manually
➜ Wait for an attempt reception during the night
➜ Choose another place for your device
➜ Set the clock manually
Incorrect indication ➜ Change the batteries
If your device fails to work despite these measures, contact the retailer where you purchased the product.
10. Waste disposal
This product has been manufactured using high-grade materials and components which can be recycled and reused.
Never dispose of empty batteries and rechargeable batteries with ordinary household waste.
As a consumer, you are required by law to take them to your retail store or to an appropriate collection site
depending on national or local regulations in order to protect the environment.
The symbols for the contained heavy metals are: Cd=cadmium, Hg=mercury, Pb=lead
This product is labelled in accordance with the EU Waste Electrical and Electronic Equipment Directive (WEEE).
Please do not dispose of this product in ordinary household waste. As a consumer, you are required to take end-
of-life devices to a designated collection point for the disposal of electrical and electronic equipment, in order to
ensure environmentally-compatible disposal.
11. Specifications
Power consumption 2 x AA 1,5 V batteries (not included)
Use alkaline batteries
Measuring range
temperature -10°C … 50°C
Display LL.L /HH.H Temperature is outside measuring range
Housing dimension 215 x 160 x 26 (68) mm
Weight 313 g (device only)
TFA_No. 60.4519_Anleitung_ 02.12.2020 6:17 Uhr Seite 9