User manual

RECORDING INTERVAL (hr:min) SETTING

The time intervals at which the temperature and humidity data saved to memory can be set to one of the

following:

1-minute; 5-minute; 10-minute; 15-minute; 20-minute; 30-minute; 1-hour; 2-hour; 3-hour; 4-hour; 6-hour; 8-

hour; 12-hour or 24-hour.

1. Press and hold the OK key until the digits “Lcd” starts flashing.

2. Press and release the OK key eleven times to enter minute setting of the recoding interval. The

min in the record LCD will be flashing.

3. Use the Plus and Minus key to set the desired recording interval.

4. Press the Mode or Alarm key to confirm and go back to the normal display mode.

LEARNING/ REMOVING A TRANSMITTER (CHANNEL)

After replacement of batteries of a particular transmitter, it is necessary to learn the transmitter again in the

learning mode. On the other hand, when user want to decrease the number of transmitters to be applied,

Digits flashing