User manual

79
To calibrate the temperature reading:
1. Press the Plus or Minus key to select a channel (the sensor at the temperature station or one of
the outdoor transmitters)
2. Press shortly the Mode key for six times. The calibration icon will be flashing.
3. Press shortly the OK key two times. The temperature digits will be flashing.
4. Press the Plus or Minus key to set the desired correction for the humidity reading. Then press the
Alarm key to exit.
ALARM PROGRAMMING FOR INDOOR/ OUTDOOR TEMPERATURE AND HUMIDITY
The weather station will allow users to set a range of specific alarms to meet specific temperature and
humidity conditions set by the user.
For example, user may set the high and low temperature alarm point at 20 and 30 °C respectively. Then
the alarm will sound once the temperature is higher than 30.0 or lower than 20.0 °C.
Temperature correction
flashing
Calibration icon flashing