Instruction manual

79
CALIBRATION OF TEMPERATURE AND HUMIDITY READING
The temperature station allows user to calibrate the displayed temperature and humidity readings by a
better reference. User may enter the correction of temperature reading and humidity reading in the range
of ±2°C and ±10% respectively.
To calibrate the humidity reading:
1. Press the Plus or Minus key to select a channel (the sensor at the temperature station or one of
the outdoor transmitters)
2. Press shortly the mode key for six times. The calibration icon will be flashing.
3. Press the ok key once. The humidity digits will be flashing.
4. Press the Plus or Minus key to set the desired correction for the humidity reading. Then press the
Alarm key to exit or the OK key to advance to the calibration of temperature reading.
Humidity correction flashing
Calibration icon flashing