TFA KlimaLogg Pro User Manual Revision: 0.
Table of Contents Overview ............................................................................................................................... 2 Getting Started ...................................................................................................................... 2 Setting up the KlimaLogg Pro device ................................................................................. 2 Installing the USB-Stick .........................................................................
Overview Welcome to the KlimaLogg Pro software, the application used to administer your TFA KlimaLogg Pro device. Using the KlimaLogg Pro software the data measured by the sensors of your KlimaLogg Pro device can be transferred and stored on your PC. The following pages detail the features and usage of the KlimaLogg Pro software application. Getting Started Setting up the KlimaLogg Pro device Before installing the KlimaLogg Pro software on your PC you should complete the setup of your KlimaLogg Pro device.
• • The PC meets the minimum system requirements. The KlimaLogg Pro software has been downloaded or otherwise acquired and transferred to the PC. Open the KlimaLogg Pro setup file, which you have downloaded. Double click the file to start the installation. Once the dialog below appears, please click „OK“. Please click “Next” when the welcome dialog is shown. Please click “Next” again to accept the default location for installation.
Finally click “Install” to start the installation process: During the installation a progress dialog is shown: When the “Completing” dialog is displayed the installation of the KlimaLogg Pro software is finished.
Click “Finish” to complete the installation and to start the KlimaLogg Pro Software. Setup added shortcuts to your start menu and desktop from which you can start the application at any time. Synchronizing What is Synchronizing? Synchronizing is the process of telling the KlimaLogg Pro device and the KlimaLogg Pro software how to talk to each other. Usually the synchronize process needs to be done only once.
The synchronization can be started manually at any time by choosing “Logger / Synchronize” from the main menu. You may want to synchronize manually to synchronize additional devices, the KlimaLogg Pro device and USB stick have lost contact or if the installation has been finished without successfully synchronizing device and PC. Using the KlimaLogg Pro software you can use up to 10 KlimaLogg Pro devices at the same time.
Operation This section covers the operation of the KlimaLogg Pro software. In this document we will not address the operation of your KlimaLogg Pro device, except where it pertains to the KlimaLogg Pro software. For more information regarding the operation of the KlimaLogg Pro device, please refer to the device documentation. Establishing Communication For communication the KlimaLogg Pro device must be brought into communication mode and the KlimaLogg Pro software needs to be started.
Sensors The sensor tabs show all information available for the selected sensor. On the left hand side the recorded data is displayed. On the right hand side the alarm settings, min./ max. values and other detailed information about the sensor are displayed. If a custom name was entered in the sensor settings it will be used as the caption of the sensor tab. It is not possible to set a custom name for the internal sensor.
backup your data before deleting the logger using the menu entry “Logger / Export Data To Text File...“. Extras • Options…: Opens the options dialog. Here you can find all settings of the KlimaLogg Pro software such as language, temperature format and date format. These settings will be used in the whole program. For a detailed description of all available options please refer to section Options. • • • Help…: Opens the online help. Visit the TFA Homepage…: http://www.tfa-dostmann.de.
Language: This option selects the language used in all windows and dialogs of the KlimaLogg Pro software. If you choose a different language the KlimaLogg Pro software needs to be restarted. Date: Select the format used for displaying dates in the KlimaLogg Pro software. Time: Select if time should be displayed in 12 hour or 24 hour format in the KlimaLogg Pro software. Temperature: Select if temperatures should be shown in °C (Celsi us) or °F (Fahrenheit) in the KlimaLogg Pro Software.
Logger Name & Logger Channel Identifies the KlimaLogg Pro device to which the settings in the dialog applies. Reread All History Data Clicking this button reads again all data that is stored on the KlimaLogg Pro device and transfers it to the PC. Already existing datasets will be overwritten. Show Automatic Export File Opens Windows Explorer and selects the export file that is used for the current KlimaLogg Pro device.
Time range Select the time range of the datasets to export. You can find common time ranges in the time range drop down box or define the exact start and end time. Target File Select the folder and filename which will be used to store the datasets. Active Channels Use this dialog to select the channels to be displayed in the device overview tab. You can hide the channels were no sensor is learned. Sensor Settings Use this dialog to change the properties including the alarm settings of a sensor.
To transfer the settings the KlimaLogg Pro device must be in communication mode. To establish communication mode please press the USB key on the KlimaLogg Pro device.