Instruction manual

66
1. The above display will be seen. Press the CH/ + key to select the level of contrast
desired.
2. Press the SET key to confirm and enter the “Time Zone setting” or exit the setting
mode by pressing the SNOOZE/ SUN key
TIME ZONE SETTING:
The time zone default of the Weather Station is 0. To change to another time zone:
1. Press the SET key after completing the LCD contrast setting in order to enter the time
zone setting (flashing).
2. Using the CH/ + key, set the time zone. The range runs from 0 to +12 and then runs
from -12 back to 0 in consecutive 1hour intervals.
3. Press the SET key to confirm and enter the “Time Reception ON/OFF setting” or
exit the setting mode by pressing the SNOOZE/ SUN key
flashing