Operation Manual

5.3 IR Mode
Use to measure IR temp, air temp, air humi,
dewpoint temperature and wet bulb
temperature without camera. It is can display
the IR MAX temp, MIN temp, DIF temp, AVG
temp.
Press and hold trigger to measure the temperature.
5.4 DEWPOINT Mode
measure the IR temp. and dewpoint temp.
Press and hold trigger to measure the temperature.
This is that the IR temperature and dewpoint temperature close to
the percentage of.
5.5 Data log
In the DATALOG mode, first set the parameter,
like high alarm value, low alarm value, interval
time, and the line color, then press the trigger
to start logging. The unit will automatically
record data, press the ESC buttom to esc the
DATALOG mode, then the data will automatically
save.
EN 9