Operation Manual

32
Before wall mounting, please check that the outdoor temperature values can
be received from the desired locations.
Wall mounting
1. Fix a screw (not supplied) into the desired wall,
leaving the head extended out by about 5mm.
2. Remove the stand from the Weather Station by
pulling it away from the base and hang the station
onto the screw. Remember to ensure that it locks
into place before releasing.
Free standing
With the foldout stand, the weather station can be
placed onto any flat surface.
POSITIONING THE TEMPERATURE TRANSMITTER:
The Transmitter is supplied with a holder that may be
attached to a wall with the two screws supplied. The
Transmitter can also be position on a flat surface by
securing the stand to the bottom to the Transmitter.