Operation Manual

33
To wall mount:
1. Secure the bracket onto a desired wall using the
screws and plastic anchors.
2. Clip the remote temperature sensor onto the
bracket.
Note:
Before permanently fixing the transmitter wall base,
place all units in the desired locations to check that the
outdoor temperature reading is receivable. In event that
the signal is not received, relocate the transmitters or
move them slightly as this may help the signal reception.
CARE AND MAINTENANCE
• Clean the instrument and the transmitter with a soft damp cloth. Do not
use solvents or scouring agents. Protect from moisture.
• Remove the batteries if you do not use the product for a lengthy period.
MALFUNCTION
Problems Troubleshooting
No indication on the
weather station
• Ensure batteries polarity are correct
• Change batteries
No transmitter reception
Display "---"
• Check batteries of external transmitter
(do not use rechargeable batteries!)
• Restart the transmitter and weather
station as per the manual
• Choose another place for the transmitter
and/or the weather station
• Reduce the distance between the
transmitter and the weather station
• Check if there is any source of
interference
No DCF reception • Time reception setting “ON”
• Choose another place for the weather
station