Operation Manual

22
2. Insert the batteries, observing the correct polarity (see marking).
3. Replace the battery compartment cover on the unit.
HOW TO INSTALL AND REPLACE BATTERIES IN THE WEATHER
STATION
The weather station uses 3 x AA, IEC LR6, 1.5V batteries. When batteries will
need to be replaced, the low battery
icon will appear on the LCD. To install
and replace the batteries, please
follow the steps below:
1. Lift up the battery compartment
cover.
2. Insert batteries observing the
correct polarity (see marking).
3. Replace compartment cover.
Battery replacement
• Replace the batteries when the battery symbol of the weather station
appears above the indoor temperature.
• When the batteries of the transmitter are used up, the low battery icon
appears above the outdoor temperature display.
Note:
In the event of changing batteries in any of the units, all units need to be reset
by following the setting up procedures. This is because a security code is
assigned by the transmitter at start-up and this code must be received and
stored by the Weather station in the first 3 minutes of power being supplied to
it.