Operation Manual

MANUAL SETTINGS:

The following manual settings can be done in the setting mode:

•

Time zone

•

Time reception DCF ON/OFF

•

Manual time

Press and hold the SET key for about 3 seconds to advance to the setting

mode:

TIME ZONE SETTING:

The time zone default is "0" hour. To set a different time zone:

1. The current time zone value starts flashing.

2. Use the + key to set the time zone. The range runs from 0, -1, -2…

-12, 12, 11, 10… 2, 1, 0, in consecutive 1-hour intervals.

Confirm with the SET key and enter the Time reception On/Off setting.

TIME RECEPTION ON/OFF SETTING

In area where reception of the radio-controlled time (DCF time) is not possible,

the time reception function can be turned OFF. The clock will then work as a

normal Quartz clock. (Default setting is ON).

1. The digit “ON” digit will start flashing on the LCD.

2. Use the + key to turn OFF the time reception function if necessary.

3. Confirm with the SET key and enter the Manual time setting.

Note:

If the Time Reception function is turned OFF manually, the clock will not

attempt any reception of the radio-controlled time (DCF time) as long as the

Time zone (flashing)

flashing