Instructions

2928
SHOW – Radio-controlled projection clock with indoor climate

SHOW – Radio-controlled projection clock with indoor climate

B 5: + button B 6: SET button
B 7: FLIP button
5.3 Housing (Fig. 2-4)
C 1: Projector (fold out 180°) C 2: Battery compartment
C 3: Stand (optional) C 4: Power adapter jack
C 5: USB Port
6. Getting started
• Remove the protective film from the display.
• For a permanent backlight and projection, to use the charging function and to conserve battery power, use the supplied power
adapter.
• Insert the power adapter pin into the device jack and connect the plug to a wall socket.
• Important! Make sure that your household voltage is no more than 240V! Otherwise your device may be damaged.
• All segments will be displayed briefly.
• Open the battery compartment and insert two new AAA 1.5 V batteries, polarity as illustrated.
 Important information on product safety!
• Do not expose the device to extreme temperatures, vibrations or shocks.
5. Elements
5.1 LCD display (Fig. 1)
A 1: AM/PM A 2: Time
A 3: Alarm symbol A 4: Weekday or date/weekday
A 5: DCF Reception symbol A 6: Charging symbol
A 7: Indoor temperature and humidity
5.2 Buttons (Fig. 2)
B 1: SNOOZE/LIGHT button B 2: ALARM button
B 3: NAP button B 4: – button
TFA_No. 60.5014_Anleitung 17.07.2018 13:28 Uhr Seite 15