Instruction manual

4. The month digit will be flashing. Use the + button to increase or MIN/MAX button to decrease the

value.

5. Press the SET button to enter day setting.

6. The day digit will be flashing. Use the + button to increase or MIN/MAX button to decrease the value.

Keep holding the button allows the value to advance faster.

7. Press the SET button to enter the “Relative air pressure reference value setting”, or exit the setting

mode by pressing the ALARM button or SUN button.

Note:

The corresponding weekday is displayed above the time in short form (from Monday to Sunday): MO / TU /

WE / TH / FR / SA / SU.

RELATIVE AIR PRESSURE REFERENCE VALUE SETTING

Relative air pressure is referred as sea level’s pressure and has to be adjusted first to your local altitude.

Ask for the present atmospheric pressure of your home area (local weather service, www, optician,

calibrated instruments in public buildings, airport).

The default relative pressure value is 1013 hPa (29.92 inHg). This can be manually set to another value

within the range of 960 – 1040 hPa (28.35 – 30.72 inHg) for a better reference.

1. The current relative pressure value will start flashing

2. Use the + button or MIN/MAX button to increase or decrease the value. Keep holding the button will

allow the value to change faster.

3. Press the SET button to exit the setting mode.

LOCATION SETTING FOR SUNRISE/SUNSET TIME

The weather station will automatically update the sunrise, sunset and sun duration time at 00:00, based on

the city location, the date, time and DST settings.

1. Press and hold the SUN button for 3 seconds to enter the Location setting mode.

2. The short form of country name will start flashing. Use the + button or MIN/MAX button to select the

country.

Note: It can be chosen from among 26 European countries and 150 cities. Every country/city is displayed in

short code. See the list at the beginning of this handbook for all the country/ city codes.

3. With the desired country selected, press the SUN button to enter City setting mode.

4. The City code will start flashing. Use the + button or MIN/MAX button to select the City. Keep holding

the button allows the value to advance faster.

Flashing

Country code (flashing)