Operation Manual

ManualsBrandsTFA ManualsAir Conditioningthermo-timer 16A

- 1 -

User Manual of Thermo-Timer ET01

The ET01 Thermo-Timer is a very versatile product that can control both temperature

and timer independently and in cohesion. Its sophisticated internal program allows users

many different combinations for various applications. The external water proof

temperature probe with cable allows temperature measurement in remote environment.

Following is the description of the operation of the ET01.

LCD display

A) Thermo-Timer in Timer mode icon

B) Thermo-Timer in ON state

C) Thermo-Timer in OFF state

D) Thermo-Timer in Temperature mode icon

E) Timer/Temperature control pair number

F) Timer/Temperature control disable

G) C/F icon

1. Power On and normal Display Modes

When an AAA battery is first inserted, all LCD display segments will be on for a brief

period then the display jumps to show clock time and an icon INT (means control is

interrupted or disabled). By pressing the MODE key once, the display can also be

diverted to show the temperature value which is the temperature measured by the probe.

The display can therefore be toggled between time and temperature by pressing the

MODE key.

Summary of content (4 pages)

PAGE 1
User Manual of Thermo-Timer ET01 The ET01 Thermo-Timer is a very versatile product that can control both temperature and timer independently and in cohesion. Its sophisticated internal program allows users many different combinations for various applications. The external water proof temperature probe with cable allows temperature measurement in remote environment. Following is the description of the operation of the ET01.
PAGE 2
. Clock Set In the clock mode, press the SET key once, an icon C will shown blinking. This is the set clock mode. Hours and minutes values can now be entered by pressing the keys h/▲ and m/▼. Press SET key once to return to normal clock display. 3. Modes of Operation There are in total three control modes of operation in ET01 selectable by the user to fit his application requirement.
PAGE 3
Mode 2 - Timer Control Mode – symbol is ( ) To enter this mode, in normal clock or temperature mode, press SET key once to see the flag C blinking. Now press the MODE key twice to enter the Timer Control Mode. The timer symbol is shown blinking together with the value of the first ON timer value which is shown in the following diagram if no value has been entered before: Use keys h/▲ and m/▼ to enter the hours and minutes of the ON time for the first timer pair.
PAGE 4
Manual Override Function During operation, the output condition of the ET01 can be altered by press the Manual Override key once, if the flag ON is shown then it will change to INT and blinking. If the INT is on, then it will switch to ON and blinking. Notes of Importance: 1. The product can be completely reset by press down SET and MODE together and release. It will return to the POWER ON condition and all set values will be lost. 2. If the display seems dim then it is time to change the battery.