Operation Manual

- 3 -
Mode 2 - Timer Control Mode – symbol is ( )
To enter this mode, in normal clock or temperature mode, press SET key once to see the
flag C blinking. Now press the MODE key twice to enter the Timer Control Mode. The
timer symbol is shown blinking together with the value of the first ON timer value
which is shown in the following diagram if no value has been entered before:
Use keys h/▲ and m/▼ to enter the hours and minutes of the ON time for the first timer
pair. Press SET once to enter the value of OFF (INT) time for the first pair. In like
manner the ON time and OFF time of the three timer pairs can be entered.
Each ON and OFF times can be suspended by using the Manual Override key during time
setting. A symbol is shown to denote this condition.
The control output is activated each time the real clock time matches the set timer time.
This means three time periods can be controlled for ON and OFF.
Mode 3 - Thermo-Timer mode - symbols is ( )
This is a combined operation mode of mode 1 and mode 2. In this mode three time pairs
with three different temperature values can be set so that three temperatures in three
periods of time can be controlled.
To enter this mode, press SET key once in normal mode to see the blinking C. Now press
the MODE key three times to see the flags and . The timer flag is blinking to notify
that the timer value can be set. After setting the ON time, press SET key to enter
temperature value set where the flag is blinking. Enter the desired temperature value
then press SET key again to set the OFF time. In like manner all three pairs of timers and
temperature values can be set. All values can be suspended by using the Manual Override
key as before.