Instruction Manual 20 memories time switches D GB F I E P NL S DK FIN CZ PL
18 page Safety precautions .......................................................................................................................................19 Assembly ...........................................................................................................................................................20 OK reset Symbols, keys .................................................................................................................................................
19 Safety precautions · The connection and installation of electrical devices may only be carried out by a qualified electrician. · Interventions in and changes to the device result in the voiding of the warranty claim. · Observe your national regulations and the respective safety provisions. · Switch-off commands have priority over switch-on commands.
20 Accessory MIL 72 D120 MIL 72E D120 Terminal cover 01.78.0004.6 Flush mounting base 01.79.0002.2 MIL 72 D220 Sealing glass Sealing glass - IP40 01.78.0021.6 Sealing screw 16.10.0011.8 Multi-terminal busbar, latch 01.78.0036.
OK 21 reset : : : : : : : Overview of daily switching program Setting of 24h or am/pm Summer/winter clock changes Weekday display Switching status display ON/OFF Manual operation / fixed ON / fixed OFF Automatic operation 14 16 1 2 3 4 5 6 7 18 20 22 24 + - Res. Menu OK +1h +/- : Adjustment keys: By pressing the key longer than 2 sec. you can adjust the timer in steps of 5 units Res.
Menu 22 Prog Setting of this programmable timer is depending of the user preference to use pre-set programs or defining own programming. Using Pre-set programs (first time installation) Using Reset key you can adjust the following values: + - Res. Menu OK +1h 24h or am/pm: see pg 22 Time (hour and minutes): see pg 23 Week day: see pg 23 Pre-set programs P01 to P03: see pg 24 User defined programming by Menu mode Using Menu key you can adjust / review the following values: + - Res.
23 Set hour 14 1 2 3 4 5 6 7 16 1 1 2 18 + 20 - Res. Menu OK 22 +1h 24 Select hour (+/-) and confirm with OK. Set minutes 14 1 2 3 4 5 6 7 16 1 1 2 18 + 20 - Res. Menu OK 22 +1h 24 Select minutes (+/-) and confirm with OK. Set week day 14 1 2 3 4 5 6 7 16 1 1 2 18 20 + - Res. Menu OK 22 +1h 24 Select week day (+/-) and confirm with OK.
Prog. 24 P01: Mo - Su, 1 x ON/OFF ON 0 6 22 24 24 Individual program, P-Under the menu option P-- you have the option of creating a user-defined program. This program can be changed at any time. There are up to 20 me-mory locations available for 10 OFF and 10 ON commands. You can allocate a corresponding weekday or week block to each memory location. 24 Note: For two channels version pre-set program is established in the two channels.
P0x 25 prog Sequence to follow after setting time in the Reset mode. 1 1 14 16 1 2 3 4 5 6 7 + - Res. Menu OK 18 +1h 20 22 Select pre-set program (+/-). 24 2 1a 1b 14 16 1 2 3 4 5 6 7 + - Res.
P-- 26 prog Sequence to follow after setting time and week day while running Menu mode or adding programs to the pre-set P01 to P03. Select program ON 14 1 2 3 4 5 6 7 1 16 18 + 20 - Res. Menu OK 22 +1h 24 and confirm with OK. Set hour ON 14 1 2 3 4 5 6 7 16 1 1 2 18 + 20 - Res. Menu OK 22 +1h 24 Select hour (+/-) and confirm with OK. Set minutes ON 14 1 2 3 4 5 6 7 16 1 1 2 18 20 + - Res. Menu OK 22 +1h 24 Select minutes (+/-) and confirm with OK.
P-- 27 prog Set week day ON 14 1 2 3 4 5 6 7 1 16 1 2 18 + 20 - Res. Menu OK 22 +1h 24 Select week day (+/-) and confirm with OK. Possible week blocks and individual days 1 2 3 4 5 6 7 Set Channel (only for 2 Channel version) 14 1 2 3 4 5 6 7 16 18 1 1 2 20 22 24 + - Res. Menu OK +1h Select Ch1 or Ch2 (+/-) and confirm with OK.
P-- 28 prog Set hour OFF 14 1 2 3 4 5 6 7 16 1 1 2 18 + 20 - Res. Menu OK 22 +1h 24 Select hour (+/-) and confirm with OK. Set minutes OFF 14 1 2 3 4 5 6 7 16 1 1 2 18 + 20 - Res. Menu OK 22 +1h 24 Select minutes (+/-) and confirm with OK. Set week day OFF 14 1 2 3 4 5 6 7 16 1c 1a 1b 18 20 + - Res. Menu OK 22 +1h 24 Should the OFF command be the same day of ON command then select Menu to terminate programming or select OK to go to a new program ON setting.
P-- 29 prog Shift Should the OFF command be the following day of ON command then select ''+'' key then select Menu or OK. Example: Mo-Fr 20:00 p.m. - 03:00 a.m. ON 03:00 a.m. - 20:00 p.m. OFF Mo-Fr 20:00 p.m. - 03:00 a.m. ON Tu-Sa 03:00 a.m. - 20:00 p.m.
del 30 1 + - 2 Res. Menu OK +1h Select Menu, then select OK key until getting onto the ON time of the program you want to delete. 1 1 14 1 2 3 4 5 6 7 16 + - Res. Menu OK 18 +1h 20 22 Select ''--'' with (+/-) key and confirm with OK. 24 2 14 1 2 3 4 5 6 7 16 + - Res. Menu OK 18 20 22 24 +1h Note: Switching programmes are deleted in ON-OFF pairs. If you delete a single ON instruction, the corresponding OFF instruction is also deleted.
+1h 31 + - +1h 14 1 2 3 4 5 6 7 Res. Menu OK 16 18 20 22 24 The +1h key is for the changeover from summer to winter time. · By pressing the +1h key 1 hour is added to the current time. · +1h is shown on the display. · By pressing +1h again 1 hour is subtracted from the current time. 14 1 2 3 4 5 6 7 + - Res. Menu OK 16 18 20 22 24 +1h The ''+'' key serves to change over between automatic , fixed ON and fixed OFF operations (Ch1).
