Manual

2
PROGRAMMING YOUR “TOWERCHRON QE1”
SETTING CURRENT TIME AND DAY
 Open the keypad cover
 Make sure that the slide switch is on position “SET TIME AND DAY” to left.
If the battery is in a fully discharged condition at the moment of installation
then the screen will be blank. The screen will start to display approximately
2 minutes after plugging into mains supply. Now operate the “RESET” button.
 Press the “RESET” button with a dull pointed instrument once
 Press the “DAY” button until the actual day is marked
 Repeatedly press “HOUR +/-”, then “MINUTES +/-” buttons until
current time is displayed.
NB • If you are setting the clock in wintertime (GMT): The clock is now
correctly set.
If you are setting the clock in summertime (BST): Press
the “SUMMER/WINTER” button once. The arrowhead at the bottom
of the display moves to indicate Summertime, and the clock is
correctly set.