User's Manual
COMTRAC RADIO
USER MAUAL
Business Entity Identifier
Business Identifier
DTC
Revision
9950-15900
3CU 04036 0026 PCZZA
108
0A
CONFIDENTIAL © Thales Canada, Transportation Solutions. All rights reserved. Passing on or copying of this document,
use or communication of its content in whole or in part is not permitted without prior written authorization.
Template : 83410477-DOC-CAN-EN
16 / 37
5.3 Fiber Ports
There is one connector which contains two fiber interfaces, and is labelled ‘FIBER’ on
the top of the unit.
The connector is a Harting Han
®
3 A with a locking feature, and uses an insert.
In reference to the Standalone radio, this interface is internally connected to the SFP
ports, using a fiber cable. Type of fiber is dependent on the variant of die-cast unit.
The following shows the pin-out as well as the signal definition.
Fiber Port Pin #
I/O Label
(ref. Standalone radio)
1
SFP 2, Tx
2
SFP 2, Rx
3
SFP 1, Tx
4
SFP 1, Rx
The following identifies patch cable to be used between the radio and the PFSE;
Item:
TCTS P/N:
Cable Assembly, SM SC/4X LC SPX, 1.5m
403-3-00986