User's Manual

COMTRAC RADIO
USER MAUAL
Business Entity Identifier
Business Identifier
DTC
Revision
9950-15900
3CU 04036 0026 PCZZA
108
0A
CONFIDENTIAL © Thales Canada, Transportation Solutions. All rights reserved. Passing on or copying of this document,
use or communication of its content in whole or in part is not permitted without prior written authorization.
Template : 83410477-DOC-CAN-EN
17 / 37
5.4 Power Interface
The power port is label as ‘AC POWER INPUT’ on the top of the unit.
The connector is a Harting series Han
®
4 A, with a locking feature, and uses a 4 position
(male) insert.
The following indicates the pin-out as well as the signal definition.
Power Connector Pin #
120-240Vac
1
Line
2
(no connect)
3
(no connect)
4
Neutral
GND
GND
The following table identifies a 1.5 meter power cable assembly using flexible conduit to
be used between the radio and the PFSE. It also identifies parts to create a bench or lab
cable (wire not specified).
Item:
TCTS P/N:
Manufacturer / P/N:
Cable Assembly
403-3-00985
Harting: 33520121500001
Insert, with pins
702-3-02147
Harting: 09 20 004 2611
Back shell (black)
Harting: 19 37 003 1440
Cable gland, M20
Harting: 19 00 000 51 55
Nominal input level is 100/240 Vac, 50/60Hz.
Operation voltage level is between 85-264Vac 47/63Hz.
The power interface is protected by an external, 5x20mm, replaceable fuse with a rating
of 3.15A 250V time-lag. TCTS part number for a replacement fuse is 600-3-00326.