User's Manual

COMTRAC RADIO
Business Entity Identifier
Business Identifier
DTC
Revision
9950-15900
3CU 04036 0026 PCZZA
108
0A
Template : 83410477-DOC-CAN-EN
21 / 37
7. STATUS INDICATORS DIE-CAST UNIT
7.1 Status Fault Indicator
The Status Fault LED indicator is used to indicate the operational status of the radio as
indicated in the following table. It is located on the front and center of the unit, and is
labelled as STATUS.
STATUS LED
Description
LED is Green
Radio is powered on and operating
LED is Orange
Radio is in a boot-up state
LED is Red
Radio is in a fault state
7.2 Wireless Network Links
The wireless network link uses a series of LEDs to indicate status, as identified by the
removable faceplate.
Only the yellow bank of LEDs is currently utilized. The green bank of LEDs is not
functional.
LED Identifier
STA / AP
Description
MODE
All
Off = wireless not configured
Flashing, 50% duty cycle;
1 sec interval = Client
½ sec interval = Access Point
ASSOC
STA only
Wireless association state.
ON when STA is associated
TxRx
All
Wireless Tx/Rx activity.
SEC
n/a
Not currently implemented