User's Manual
COMTRAC RADIO
USER MAUAL
Business Entity Identifier
Business Identifier
DTC
Revision
9950-15900
3CU 04036 0026 PCZZA
108
0A
CONFIDENTIAL © Thales Canada, Transportation Solutions. All rights reserved. Passing on or copying of this document,
use or communication of its content in whole or in part is not permitted without prior written authorization.
Template : 83410477-DOC-CAN-EN
27 / 37
11. EMC CONSIDERATIONS
To ensure the radio is compliant with EMC emission standards, the radio must be
connected to ground. It is recommended to use a braided cable kept as short as
practical for this purpose. Maximum length between bonding points should be less than
1 meter.
For the Standalone variant, this connection is located on the side of the unit, using the
screw location with the open area around / underneath the screw head. It is identified by
a ground symbol. The mounting screw is a No. 8 (4mm) and comes with the unit.
Locking hardware is needed.
For the Die-cast variant, this connection is located at the corner near the power
connector, and is identified by a ground symbol.
The size of the grounding bolt is a No. 6 (3.5mm) and comes with locking hardware and
an N10, #16-14, crimp terminal ring.
This connection is also necessary to comply with safety standards.