Installation Guide
Table Of Contents
- RECORD OF CHANGES
- Thales Defense & Security, Inc.
- Equipment included in this declaration
- Declaration
- Manufacturer
- Place and Date
- CHAPTER 1 INTRODUCTION
- Description
- Indicator
- B/ System
- System functioning properly
- Solid GREEN
- System busy (Booting up)
- Flashing GREEN
- Fault (minor issue)
- Solid RED
- Critical fault (major issue)
- Flashing RED
- B/ Satellite
- Connected and passing data (over satellite)
- Solid BLUE
- System functioning properly
- Solid GREEN
- Acquiring satellite
- Flashing GREEN
- Fault (minor issue)
- Solid RED
- Critical fault (major issue)
- Flashing RED
- / Wi-Fi
- Wi-Fi OFF
- OFF
- Wi-Fi busy
- Flashing GREEN
- System functioning properly
- Solid Green
- Fault (minor issue)
- Solid RED
- Critical fault (major issue)
- Flashing RED
- CHAPTER 2 INSTALLATION
- Description
- Indicator
- / System
- System functioning properly
- Solid GREEN
- System busy (Booting up)
- Flashing GREEN
- Fault (minor issue)
- Solid RED
- Critical fault (major issue)
- Flashing RED
- / Satellite
- Connected and passing data (over satellite)
- Solid BLUE
- System functioning properly
- Solid GREEN
- Acquiring satellite
- Flashing GREEN
- Fault (minor issue)
- Solid RED
- Critical fault (major issue)
- Flashing RED
- / Wi-Fi
- Wi-Fi OFF
- OFF
- Wi-Fi busy
- Flashing GREEN
- System functioning properly
- Solid Green
- Fault (minor issue)
- Solid RED
- Critical fault (major issue)
- Flashing RED
- CHAPTER 3 TROUBLESHOOTING
- CHAPTER 4 TECHNICAL SPECIFICATIONS
- CHAPTER 5 ACRONYMS / GLOSSARY
2-11
Installation Guide 84465 Rev. F
Figure 2-5 Terminal Unit Mounting Detail
Table 2-3 Installation Kit, Terminal Unit (PN 1100789-501)
Item
Number
Description Part Number Qty
1
Screw Phil Pan HD 18-8 M6x1x20mm SS
BLK Oxide
82768-001
4
2
Washer Split Lock M6 (DIN 127B) A4 SS
BLK Oxide
71304-001
4
3
Washer Flat M6 6.4mm ID x 12mm OD x
1.6mm THK SS BLK Oxide
71298-001
4
4
Nut Lock w/Nylon Insert M6x1 18-8 SS
75656-001
4
1. Use the template information provided in Appendix B to create the appropriate hole
pattern in the desired mounting surface for the chosen mounting hardware.
NOTE
Hole sizing and hardware are shown for through hole mounting
as shown in Appendix B. User may mount antenna with other
hardware at their discretion and own risk.