Installation Guide
Table Of Contents
- RECORD OF CHANGES
- Thales Defense & Security, Inc.
- Equipment included in this declaration
- Declaration
- Manufacturer
- Place and Date
- CHAPTER 1 INTRODUCTION
- Description
- Indicator
- B/ System
- System functioning properly
- Solid GREEN
- System busy (Booting up)
- Flashing GREEN
- Fault (minor issue)
- Solid RED
- Critical fault (major issue)
- Flashing RED
- B/ Satellite
- Connected and passing data (over satellite)
- Solid BLUE
- System functioning properly
- Solid GREEN
- Acquiring satellite
- Flashing GREEN
- Fault (minor issue)
- Solid RED
- Critical fault (major issue)
- Flashing RED
- / Wi-Fi
- Wi-Fi OFF
- OFF
- Wi-Fi busy
- Flashing GREEN
- System functioning properly
- Solid Green
- Fault (minor issue)
- Solid RED
- Critical fault (major issue)
- Flashing RED
- CHAPTER 2 INSTALLATION
- Description
- Indicator
- / System
- System functioning properly
- Solid GREEN
- System busy (Booting up)
- Flashing GREEN
- Fault (minor issue)
- Solid RED
- Critical fault (major issue)
- Flashing RED
- / Satellite
- Connected and passing data (over satellite)
- Solid BLUE
- System functioning properly
- Solid GREEN
- Acquiring satellite
- Flashing GREEN
- Fault (minor issue)
- Solid RED
- Critical fault (major issue)
- Flashing RED
- / Wi-Fi
- Wi-Fi OFF
- OFF
- Wi-Fi busy
- Flashing GREEN
- System functioning properly
- Solid Green
- Fault (minor issue)
- Solid RED
- Critical fault (major issue)
- Flashing RED
- CHAPTER 3 TROUBLESHOOTING
- CHAPTER 4 TECHNICAL SPECIFICATIONS
- CHAPTER 5 ACRONYMS / GLOSSARY
2-14
Installation Guide 84465 Rev. F
Connecting Power to the TU
The TU has two power connections available:
• DC Operation for vehicles operating from 12 or 24 Volt DC batteries: 10-32 Volts
DC power cable (Part # 855024-020):
o RED + ( 10-32VDC)
o BLACK – ( GND)
o Yellow (Ignition Switch)
Turns TU on/off with vehicle ignition or from a remote switch
Leave unconnected for TU front panel power button operation
on/off
• AC Operation: The external AC/DC supply (Part #: 84670-001) with power cord.
(See Figure 2-9)
Figure 2-9 AC/DC Power Supply
NOTE
To safely disconnect the TU from the power source, unplug the
unit from the power outlet.
NOTE
When installing the TU, the power outlet should be near the TU
and be easily accessible.