User's Manual

4-3
User Manual PN 84468 Rev I
• System – Enables the Administrator to perform system backups, view data usage, reset
the system, and view/update system firmware.
• Diagnostics – Enables the administrator to run a self-test, check system status, and view
the diagnostics log.
• About – Provides system level information for the antenna, modem, power supply,
system, VoIP Module, and Wi-Fi.
• Help – Provides a link to the MissionLINK User Documentation (Users Guide,
Installation Instructions, and Quick Start Guide (QSG)).
NOTE
Depending on the web browser being used, you may see a
message that says NOT SECURE. If you type https://, this
message will go away. This message does not affect operation of
the management portal.
Menu Components
The System Status Icons at the top of the screen, highlighted in Figure 4-1, provide system level
information at a glance. When selected, these icons provide addition screen(s) of information and
a quick way to make certain configuration setting changes by the administrator.
Figure 4-1 Quick Link Icons
NOTE
Status icons on the GUI may lag those on the TU, due to the
GUI refreshing every 10 to 15 seconds.