User's Manual
Table Of Contents
- CHAPTER 1 f
- RECORD OF CHANGES
- Thales Defense & Security, Inc.
- Equipment included in this declaration
- Declaration
- Manufacturer
- Place and Date
- CHAPTER 1 INTRODUCTION
- CHAPTER 2 SYSTEM OVERVIEW
- Description
- Indicator
- / System
- System functioning properly
- Solid GREEN
- System busy (Booting up)
- Flashing GREEN
- Fault (minor issue)
- Solid RED
- Critical fault (major issue)
- Flashing RED
- / Satellite
- Connected and passing data (over satellite)
- Solid BLUE
- System functioning properly
- Solid GREEN
- Acquiring satellite
- Flashing GREEN
- Fault (minor issue)
- Solid RED
- Critical fault (major issue)
- Flashing RED
- / Wi-Fi
- Wi-Fi OFF
- OFF
- Wi-Fi busy
- Flashing GREEN
- System functioning properly
- Solid Green
- Fault (minor issue)
- Solid RED
- Critical fault (major issue)
- Flashing RED
- CHAPTER 3 GETTING STARTED
- Description
- Indicator
- / System
- System functioning properly
- Solid GREEN
- System busy (Booting up)
- Flashing GREEN
- Fault (minor issue)
- Solid RED
- Critical fault (major issue)
- Flashing RED
- / Satellite
- Connected and passing data (over satellite)
- Solid BLUE
- System functioning properly
- Solid GREEN
- Acquiring satellite
- Flashing GREEN
- Fault (minor issue)
- Solid RED
- Critical fault (major issue)
- Flashing RED
- / Wi-Fi
- Wi-Fi OFF
- OFF
- Wi-Fi busy
- Flashing GREEN
- System functioning properly
- Solid Green
- Fault (minor issue)
- Solid RED
- Critical fault (major issue)
- Flashing RED
- CHAPTER 4 THALES MANAGEMENT PORTAL
- CHAPTER 5 FIRMWARE UPGRADE
- CHAPTER 6 MAINTENANCE
- CHAPTER 7 TECHNICAL SPECIFICATIONS
- CHAPTER 8 ACRONYMS / GLOSSARY
- CHAPTER 9 KIT CONTENTS AND ACCESSORIES
5-2
User Manual PN 84468 Rev I
5. Select CHOOSE FILE.
6. Go to File Input and select the Browse button.
7. Navigate to location of downloaded file. This file should have the firmware version
and “.swu” as the file extension
o Example: thaleslink_1.1.0.1.swu
8. Select the “SELECT” button
9. After file has been selected return to the Firmware page.
10. Select “UPLOAD FIRMWARE” button. This may take a few seconds as a progress
bar moves across the page (see Figure 5-2).
Figure 5-2 Firmware Being Staged
11. Once staged the Firmware page will display “UPDATE STAGED” (At this point user
will be able to see Current and New Versions side by side on the Firmware page)
12. Select “Yes, Update”.