Specifications

Cinterion
®
ALAS5 Hardware Interface Overview
1.2 Key Features at a Glance
15
 ALAS5_HIO_v00.030a 2019-04-01
Confidential / Preliminary
Page 8 of 50
1.2 Key Features at a Glance
Feature Implementation
General
Frequency bands Note: Not all of the frequency bands (and 3GPP technologies) mentioned
throughout this document are supported by every
ALAS5 product variant.
Please refer to Section 1.2.1 for an overview of the frequency bands sup-
ported by each
ALAS5 product variant.
GSM class Small MS
Output power
(according to Release 99)
GSM/GPRS/UMTS:
Class 4 (+33dBm ±2dB) for EGSM850 and EGSM900
Class 1 (+30dBm ±2dB) for GSM1800 and GSM1900
Class E2 (+27dBm ± 3dB) for GSM 850 8-PSK and GSM 900 8-PSK
Class E2 (+26dBm +3 /-4dB) for GSM 1800 8-PSK and GSM 1900 8-PSK
Class 3 (+24dBm +1/-3dB) for all supported WCDMA FDD bands
Output power
(according to Release 4)
TD-SCDMA:
Class 2 (+24dBm +1/-3dB) for TD-SCDMA 1900 (Bd39) and TD-SCDMA
2000 (Bd34)
Output power
(according to Release 8)
LTE (FDD):
Class 3 (+23dBm ±2dB) for all supported LTE FDD bands
LTE (TDD):
Class 3 (+23dBm ±2dB) for all supported LTE TDD bands
Power supply 3.3V <
V
BATT+
< 4.2V
Operating temperature
(board temperature)
Normal operation: -30°C to +85°C
Restricted operation: -40°C to +95°C
Physical Dimensions: 40mm x 36mm x 3mm
Weight: 8.8g
RoHS All hardware components fully compliant with EU RoHS Directive
LTE features
3GPP Release 13 Down- and Uplink carrier aggregation (CA) to increase bandwidth, and
thereby increase bitrate:
• Maximum aggregated bandwidth: 80MHz
• Maximum number of component carriers: 2
• Inter-band FDD
• Intra-band FDD, TDD, contiguous, non-contiguous
• Supported inter- and intra-band CA configurations: See Section 1.2.2
CAT 6 supported
DL 300Mbps, UL 50Mbps
2x2 MIMO in DL direction
HSPA features
3GPP Release 8 UE CAT. 14, 24
DC-HSPA+ – DL 42Mbps
HSUPA – UL 5.76Mbps
Compressed mode (CM) supported according to 3GPP TS25.212