Product Card
Table Of Contents
- Contents
- Tables
- Figures
- 0 Document History
- 1 Introduction
- 2 Product Concept
- 3 Application Connector Interface
- 3.1 Pin Assignments and Electrical Description
- 3.2 Characteristics
- 3.2.1 Power Supply and Ground
- 3.2.2 Control Signals
- 3.2.3 Tunable Antenna Interface
- 3.2.4 WWAN/WiFi Coexistence Control
- 3.2.5 Dynamic Power Reduction
- 3.2.6 USB Interface
- 3.2.7 PCI Express® Interface
- 3.2.8 SIM/UICC Interface
- 3.2.9 eUICC Interface
- 3.2.10 GPIO Interface
- 3.2.11 Status
- 3.2.12 Add-in Card Configuration Pins
- 4 Antenna Interface
- 5 Operation
- 6 Appendix
Cinterion
®
MV31-W Hardware Interface Description
2.3 Mechanical Dimensions
75
t MV31-W_HID_v01.009a 2022-04-27
Public / Preliminary
Page 19 of 76
The 5G M.2 Data Card MV31-W complies with the single-sided add-in card H2.3-S5: “Stack-
up Top Mount Single-sided Add-in Card for 2.00 Maximum Top-side Component Height and
with Higher Clearance above Motherboard” specified in [3].
Figure 7: H2.3-S5 single-sided add-in card dimensions
The area under the 5G M.2 Data Card on the Application Board should be free of components
and signals, but needs to be part of a thermal solution (see Section 5.3).
values in mm